[RFC PATCH 2/2] PCI: rockchip-host: drop wait on PERST# toggle

[Geraldo Nascimento]

On Wed, Nov 05, 2025 at 10:06:53AM +0100, Diederik de Haas wrote:
> I have a Samsung PM981 (without the 'a') and AFAICT it works fine.
> I had noticed that the PERST# (pinctrl) was missing, but 'ep-gpios'
> was/is new to me and I hadn't had time to research that properly yet.
> Good to see you already found it yourself :-)
> 
> Cheers,
>   Diederik

Hello Diederik,

Thanks for the heads up!

Would you mind testing the following DT change to make sure your PM981
continues to work fine?

Thank you,
Geraldo Nascimento

---

diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
index aa70776e898a..b3d19dce539f 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
@@ -383,7 +383,7 @@ &pcie_phy {
 };
 
 &pcie0 {
-	ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
+	ep-gpios = <&gpio0 RK_PB4 (GPIO_ACTIVE_HIGH | GPIO_SINGLE_ENDED)>;
 	num-lanes = <4>;
 	pinctrl-0 = <&pcie_clkreqnb_cpm>;
 	pinctrl-names = "default";