[PATCH] arm64: dts: rockchip: Fix USB power enable pin for BTT CB2 and Pi2

[Andrey Leonchikov]

 Fix typo into regulator GPIO definition. With current
 definition - USB powered off. Valid definition can be found on "pinctrl"
 section:
 		vcc5v0_usb2t_en: vcc5v0-usb2t-en {
 				rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
 				 		};

 		vcc5v0_usb2b_en: vcc5v0-usb2b-en {
 			rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};

Fixes: bfbc663d2733a ("arm64: dts: rockchip: Add BigTreeTech CB2 and Pi2")
Signed-off-by: Andrey Leonchikov <andreil499 at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
index f74590af7e33..b6cf03a7ba66 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
@@ -187,7 +187,7 @@ vcc5v0_usb: regulator-vcc5v0-usb {
 	vcc5v0_usb2b: regulator-vcc5v0-usb2b {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpio = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_usb2b_en>;
 		regulator-name = "vcc5v0_usb2b";
@@ -199,7 +199,7 @@ vcc5v0_usb2b: regulator-vcc5v0-usb2b {
 	vcc5v0_usb2t: regulator-vcc5v0-usb2t {
 		compatible = "regulator-fixed";
 		enable-active-high;
-		gpios = <&gpio0 RK_PD5 GPIO_ACTIVE_HIGH>;
+		gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_usb2t_en>;
 		regulator-name = "vcc5v0_usb2t";
-- 
2.51.0