[PATCH 2/2] usb: dwc3: imx8mp: disable auto suspend for host role
Frank Li
Frank.li at nxp.com
Wed Nov 5 07:44:57 PST 2025
On Wed, Nov 05, 2025 at 03:45:03PM +0800, Xu Yang wrote:
> Do dwc3 core auto suspend enable for device and disable for host
> , this can make sure dwc3 core device auto suspend setting is
> correct all the time, the background of disable dwc3 core device
> auto suspend is to make its parent device suspend immediately
> (so wakeup enable can be enabled) after xhci-plat device suspended,
Does wakeup only enable at runtime pm suspend? why core delay runtime
pm suspend impact wakeup function?
Frank
> for device mode, we keep the dwc3 core device auto suspend is to
> give some wait for gadget to be enumerated.
>
> Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> ---
> drivers/usb/dwc3/dwc3-imx8mp.c | 31 +++++++++++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
> index bce6af82f54c..80a431cb6fed 100644
> --- a/drivers/usb/dwc3/dwc3-imx8mp.c
> +++ b/drivers/usb/dwc3/dwc3-imx8mp.c
> @@ -158,11 +158,31 @@ static irqreturn_t dwc3_imx8mp_interrupt(int irq, void *_dwc3_imx)
> return IRQ_HANDLED;
> }
>
> +static void dwc3_imx_pre_set_role(struct dwc3 *dwc, enum usb_role role)
> +{
> + if (role == USB_ROLE_HOST)
> + /*
> + * For xhci host, we need disable dwc core auto
> + * suspend, because during this auto suspend delay(5s),
> + * xhci host RUN_STOP is cleared and wakeup is not
> + * enabled, if device is inserted, xhci host can't
> + * response the connection.
> + */
> + pm_runtime_dont_use_autosuspend(dwc->dev);
> + else
> + pm_runtime_use_autosuspend(dwc->dev);
> +}
> +
> +struct dwc3_glue_ops dwc3_imx_glue_ops = {
> + .pre_set_role = dwc3_imx_pre_set_role,
> +};
> +
> static int dwc3_imx8mp_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct device_node *node = dev->of_node;
> struct dwc3_imx8mp *dwc3_imx;
> + struct dwc3 *dwc3;
> struct resource *res;
> int err, irq;
>
> @@ -240,6 +260,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
> goto depopulate;
> }
>
> + dwc3 = platform_get_drvdata(dwc3_imx->dwc3);
> + if (!dwc3) {
> + err = dev_err_probe(dev, -EPROBE_DEFER, "failed to get dwc3 platform data\n");
> + goto depopulate;
> + }
> +
> + dwc3->glue_ops = &dwc3_imx_glue_ops;
> +
> + if (dwc3->dr_mode == USB_DR_MODE_HOST)
> + pm_runtime_dont_use_autosuspend(dwc3->dev);
> +
> err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
> IRQF_ONESHOT, dev_name(dev), dwc3_imx);
> if (err) {
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list