[PATCH 2/3] dt-bindings: mfd: Add Realtek ISO system controller

[Krzysztof Kozlowski]

On 05/11/2025 11:44, Yu-Chun Lin wrote:
> Add DT binding schema for Realtek system controller.
> 
> Signed-off-by: Yu-Chun Lin <eleanor.lin at realtek.com>
> ---
>  .../bindings/mfd/realtek,iso-system.yaml      | 65 +++++++++++++++++++
>  1 file changed, 65 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/realtek,iso-system.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/realtek,iso-system.yaml b/Documentation/devicetree/bindings/mfd/realtek,iso-system.yaml
> new file mode 100644
> index 000000000000..6fbdedd3ee5b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/realtek,iso-system.yaml
> @@ -0,0 +1,65 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/realtek,iso-system.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek ISO System Controller
> +
> +description: |


Do not need '|' unless you need to preserve formatting.

> +  The Realtek ISO System Controller is a register area that contains
> +  miscellaneous system registers for the SoC and serves as a parent node
> +  for other functions.
> +
> +maintainers:
> +  - James Tai <james.tai at realtek.com>
> +  - Yu-Chun Lin <eleanor.lin at realtek.com>
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - realtek,iso-system

No clue what is "iso system", neither commit msg, nor title nor
description explain me that. Please add first bindings for the iso soc
or if this is not soc, then use only soc-specific compatibles (see
writing bindings doc).

> +      - const: syscon
> +      - const: simple-mfd
> +
> +  reg:
> +    maxItems: 1
> +
> +  ranges:
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +  reg-io-width:
> +    const: 4
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":
> +    type: object
> +    description: Catch-all for other sub-devices in the ISO area.

Nope, sorry. Define exact children. All of them.

> +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - '#address-cells'
> +  - '#size-cells'
> +  - reg-io-width
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    iso: syscon at 7000 {

Drop label.

> +        compatible = "realtek,iso-system", "syscon", "simple-mfd";
> +        reg = <0x7000 0x1000>;
> +        ranges = <0x0 0x7000 0x1000>;
> +        reg-io-width = <4>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;

No children here, so drop simple-mfd and all these fake child stuff.


Best regards,
Krzysztof