[PATCH v3 2/3] media: nxp: imx8-isi: Keep the default value for BLANK_PXL field

[Guoniu Zhou]

From: Guoniu Zhou <guoniu.zhou at nxp.com>

The field BLANK_PXL provides the value of the blank pixel to be inserted
in the image in case an overflow error occurs in the output buffers of
the channel. Its default value is 0xff, so no need to set again.

Besides, the field only exist in i.MX8QM/XP ISI version. Other versions
like i.MX 8M series, remove the field since it won't send data to AXI bus
when overflow error occurs and mark BLANK_PXL as reserved. i.MX9 series
use it for other purposes.

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li at nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou at nxp.com>
---
 drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
index 9225a7ac1c3ee7e42e64983982eb4b6c27e356fe..0187d4ab97e8e28fca9013f6864a094e08f2c570 100644
--- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
+++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-hw.c
@@ -309,8 +309,8 @@ static void mxc_isi_channel_set_control(struct mxc_isi_pipe *pipe,
 
 	val = mxc_isi_read(pipe, CHNL_CTRL);
 	val &= ~(CHNL_CTRL_CHNL_BYPASS | CHNL_CTRL_CHAIN_BUF_MASK |
-		 CHNL_CTRL_BLANK_PXL_MASK | CHNL_CTRL_SRC_TYPE_MASK |
-		 CHNL_CTRL_MIPI_VC_ID_MASK | CHNL_CTRL_SRC_INPUT_MASK);
+		 CHNL_CTRL_SRC_TYPE_MASK | CHNL_CTRL_MIPI_VC_ID_MASK |
+		 CHNL_CTRL_SRC_INPUT_MASK);
 
 	/*
 	 * If no scaling or color space conversion is needed, bypass the
@@ -323,8 +323,6 @@ static void mxc_isi_channel_set_control(struct mxc_isi_pipe *pipe,
 	if (pipe->chained)
 		val |= CHNL_CTRL_CHAIN_BUF(CHNL_CTRL_CHAIN_BUF_2_CHAIN);
 
-	val |= CHNL_CTRL_BLANK_PXL(0xff);
-
 	/* Input source (including VC configuration for CSI-2) */
 	if (input == MXC_ISI_INPUT_MEM) {
 		/*

-- 
2.34.1