[PATCH net-next v2 0/4] net: altera-tse: Cleanup init sequence

[patchwork-bot+netdevbpf at kernel.org]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba at kernel.org>:

On Mon,  3 Nov 2025 11:49:23 +0100 you wrote:
> Hi, this is a V2 for Altera TSE cleanup to make sure everything is
> properly intialized before registering the netdev.
> 
> When Altera TSE was converted to phylink, the PCS and phylink creation
> were added after register_netdev(), which is wrong as this may race
> with .ndo_open() once the netdev is registered.
> 
> [...]

Here is the summary with links:
  - [net-next,v2,1/4] net: altera-tse: Set platform drvdata before registering netdev
    https://git.kernel.org/netdev/net-next/c/687452051886
  - [net-next,v2,2/4] net: altera-tse: Warn on bad revision at probe time
    https://git.kernel.org/netdev/net-next/c/dd2619d38d7e
  - [net-next,v2,3/4] net: altera-tse: Don't use netdev name for the PCS mdio bus
    https://git.kernel.org/netdev/net-next/c/9350ea63fec6
  - [net-next,v2,4/4] net: altera-tse: Init PCS and phylink before registering netdev
    https://git.kernel.org/netdev/net-next/c/055e554b8fff

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html