[PATCH v3 4/4] clk: imx95-blk-ctl: Add one clock mux for HSIO block

[Xu Yang]

The GPR_REG0 register has an USB_PHY_REF_CLK_SEL (bit 6) to select USB 3.0
PHY reference clock.

USB_PHY_REF_CLK_SEL:
bit[6]   - 0b 24 MHz external oscillator
         - 1b 100 MHz high performance PLL

Add a clock multiplexer to support USB3.0 PHY clock selection.

Reviewed-by: Peng Fan <peng.fan at nxp.com>
Reviewed-by: Frank Li <Frank.Li at nxp.com>
Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
---
Changes in v2:
 - add Rb tag
---
 drivers/clk/imx/clk-imx95-blk-ctl.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/clk/imx/clk-imx95-blk-ctl.c b/drivers/clk/imx/clk-imx95-blk-ctl.c
index 56bed44719954d6a644606914b61dad672cd82cf..c078b2ee28e81155ca3a93d26c2e757c8ddc91be 100644
--- a/drivers/clk/imx/clk-imx95-blk-ctl.c
+++ b/drivers/clk/imx/clk-imx95-blk-ctl.c
@@ -302,6 +302,24 @@ static const struct imx95_blk_ctl_dev_data hsio_blk_ctl_dev_data = {
 	.clk_reg_offset = 0,
 };
 
+static const struct imx95_blk_ctl_clk_dev_data hsio_usb_blk_ctl_clk_dev_data[] = {
+	[0] = {
+		.name = "usb_phy_ref_clk_sel",
+		.parent_names = (const char *[]){"osc24m", "hsiopll"},
+		.num_parents = 2,
+		.reg = 0,
+		.bit_idx = 6,
+		.bit_width = 1,
+		.type = CLK_MUX,
+		.flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+	}
+};
+
+static const struct imx95_blk_ctl_dev_data hsio_usb_blk_ctl_dev_data = {
+	.num_clks = 1,
+	.clk_dev_data = hsio_usb_blk_ctl_clk_dev_data,
+};
+
 static const struct imx95_blk_ctl_clk_dev_data imx94_lvds_clk_dev_data[] = {
 	[IMX94_CLK_DISPMIX_LVDS_CLK_GATE] = {
 		.name = "lvds_clk_gate",
@@ -519,6 +537,7 @@ static const struct of_device_id imx95_bc_of_match[] = {
 	{ .compatible = "nxp,imx95-display-csr", .data = &imx95_dispmix_csr_dev_data },
 	{ .compatible = "nxp,imx95-lvds-csr", .data = &imx95_lvds_csr_dev_data },
 	{ .compatible = "nxp,imx95-hsio-blk-ctl", .data = &hsio_blk_ctl_dev_data },
+	{ .compatible = "nxp,imx95-hsio-usb-blk-ctl", .data = &hsio_usb_blk_ctl_dev_data },
 	{ .compatible = "nxp,imx95-vpu-csr", .data = &vpublk_dev_data },
 	{ .compatible = "nxp,imx95-netcmix-blk-ctrl", .data = &netcmix_dev_data},
 	{ /* Sentinel */ },

-- 
2.34.1