[PATCH v3 0/4] Add i.MX95 USB3.0 PHY alternate clock support

[Xu Yang]

The i.MX95 USB3.0 PHY supports XTAL 24MHz clock by default as reference
clock and 100MHz clock as alternate reference clock. If the default
reference clock brings USB performance degradation in bad condition, such
as the working temperature is too low or too high, switch to alternate
clock may overcome the degradation. This will add alternate clock support
to enhance the function of USB3.0 PHY.

---
Changes in v3:
- collect some Rb and Ab tag
- Link to v2: https://lore.kernel.org/r/20251010-usb-phy-alt-clk-support-v2-0-af4b78bb4ae8@nxp.com

Changes in v2:
- improve patch #1 commit message
- collect Rb tag
- Link to v1: https://lore.kernel.org/r/20250919-usb-phy-alt-clk-support-v1-0-57c2a13eea1c@nxp.com

---
Xu Yang (4):
      dt-bindings: phy: imx8mq-usb: add alternate reference clock
      dt-bindings: clock: nxp,imx95-blk-ctl: add support for USB in HSIO Block Control
      phy: fsl-imx8mq-usb: support alternate reference clock
      clk: imx95-blk-ctl: Add one clock mux for HSIO block

 .../bindings/clock/nxp,imx95-blk-ctl.yaml          |  1 +
 .../bindings/phy/fsl,imx8mq-usb-phy.yaml           |  7 ++++++-
 drivers/clk/imx/clk-imx95-blk-ctl.c                | 19 ++++++++++++++++++
 drivers/phy/freescale/phy-fsl-imx8mq-usb.c         | 23 ++++++++++++++++++++--
 4 files changed, 47 insertions(+), 3 deletions(-)
---
base-commit: 18514fd70ea4ca9de137bb3bceeac1bac4bcad75
change-id: 20250919-usb-phy-alt-clk-support-e54e69ac0780

Best regards,
-- 
Xu Yang <xu.yang_2 at nxp.com>