[PATCH 3/4] arm64: dts: imx8mp-nominal: Explicitly configure nominal VPU clocks

[Adam Ford]

In preparation for increasing the default VPU clocks to overdrive,
configure the nominal values first to avoid running the nominal
devices out of spec when imx8mp.dtsi is changed.

Signed-off-by: Adam Ford <aford173 at gmail.com>
---
 .../boot/dts/freescale/imx8mp-nominal.dtsi     | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
index 2ce1860b244d..f269f7a004fc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-nominal.dtsi
@@ -89,4 +89,22 @@ &media_blk_ctrl {
 			       <1039500000>;
 };
 
+&vpu_g1 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
+	assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>;
+};
+
+&vpu_g2 {
+	assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
+	assigned-clock-rates = <500000000>;
+};
+
+&vpumix_blk_ctrl {
+	assigned-clocks = <&clk IMX8MP_VPU_PLL>, <&clk IMX8MP_CLK_VPU_BUS>;
+	assigned-clock-parents = <0>, <&clk IMX8MP_VPU_PLL_OUT>;
+	assigned-clock-rates = <600000000>, <600000000>;
+};
+
 /delete-node/ &{noc_opp_table/opp-1000000000};
-- 
2.48.1