[PATCH v3 6/9] ARM: dts: stm32: add Hardware debug port (HDP) on stm32mp15

[Krzysztof Kozlowski]

On 28/05/2025 14:15, Clement LE GOFFIC wrote:
> On 5/28/25 11:00, Krzysztof Kozlowski wrote:
>> On 23/05/2025 14:38, Clément Le Goffic wrote:
>>> Add the hdp devicetree node for stm32mp15 SoC family
>>>
>>> Signed-off-by: Clément Le Goffic <clement.legoffic at foss.st.com>
>>> ---
>>>   arch/arm/boot/dts/st/stm32mp151.dtsi | 7 +++++++
>>>   1 file changed, 7 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
>>> index 0daa8ffe2ff5..b1b568dfd126 100644
>>> --- a/arch/arm/boot/dts/st/stm32mp151.dtsi
>>> +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
>>> @@ -270,6 +270,13 @@ dts: thermal at 50028000 {
>>>   			status = "disabled";
>>>   		};
>>>   
>>> +		hdp: pinctrl at 5002a000 {
>>> +			compatible = "st,stm32mp151-hdp";
>>> +			reg = <0x5002a000 0x400>;
>>> +			clocks = <&rcc HDP>;
>>> +			status = "disabled";
>>
>> Same questions here and in further patches.
> 
> Same, disabled by default and enable in board's dts file


So the same answer, node is complete so should it be enabled.

Best regards,
Krzysztof