[PATCH v3 3/4] dt-bindings: crypto: fsl,sec-v4.0: Add power domains for iMX8QM and iMX8QXP

[John Ernberg]

Hi Rob,

On Wed, May 28, 2025 at 04:52:09PM -0500, Rob Herring wrote:
> On Wed, May 28, 2025 at 02:43:07PM +0000, John Ernberg wrote:
> > NXP SoCs like the iMX8QM, iMX8QXP or iMX8DXP use power domains for
> > resource management.
> > 
> > Allow specifying them for such SoCs.
> > 
> > Signed-off-by: John Ernberg <john.ernberg at actia.se>
> > 
> > ---
> > 
> > v3:
> >  - Fix warnings discovered by Rob Herring's bot
> >  - Declare the compatibles correctly (Krzysztof Kozlowski)
> > 
> > v2:
> >  - Adjust commit message (Frank Li)
> >  - Only allow power-domains when compatible with imx8qm (Frank Li)
> > ---
> >  .../bindings/crypto/fsl,sec-v4.0.yaml         | 45 ++++++++++++++++++-
> >  1 file changed, 44 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
> > index 75afa441e019..a4ada0e2d97c 100644
> > --- a/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
> > +++ b/Documentation/devicetree/bindings/crypto/fsl,sec-v4.0.yaml
> > @@ -46,6 +46,7 @@ properties:
> >        - items:
> >            - enum:
> >                - fsl,imx6ul-caam
> > +              - fsl,imx8qm-caam
> >                - fsl,sec-v5.0
> >            - const: fsl,sec-v4.0
> >        - const: fsl,sec-v4.0
> > @@ -77,6 +78,9 @@ properties:
> >    interrupts:
> >      maxItems: 1
> >  
> > +  power-domains:
> > +    maxItems: 1
> > +
> >    fsl,sec-era:
> >      description: Defines the 'ERA' of the SEC device.
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > @@ -106,7 +110,9 @@ patternProperties:
> >                - const: fsl,sec-v5.0-job-ring
> >                - const: fsl,sec-v4.0-job-ring
> >            - items:
> > -              - const: fsl,sec-v5.0-job-ring
> > +              - enum:
> > +                - fsl,imx8qm-job-ring
> > +                - fsl,sec-v5.0-job-ring
> >                - const: fsl,sec-v4.0-job-ring
> >            - const: fsl,sec-v4.0-job-ring
> >  
> > @@ -116,6 +122,9 @@ patternProperties:
> >        interrupts:
> >          maxItems: 1
> >  
> > +      power-domains:
> > +        maxItems: 1
> > +
> >        fsl,liodn:
> >          description:
> >            Specifies the LIODN to be used in conjunction with the ppid-to-liodn
> > @@ -212,6 +221,40 @@ required:
> >    - reg
> >    - ranges
> >  
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: fsl,imx8qm-caam
> > +    then:
> > +      required:
> > +        - power-domains
> > +    else:
> > +      properties:
> > +        power-domains: false
> > +
> > +  - if:
> 
> This 'if' belongs under the '^jr@[0-9a-f]+$' subschema which will then 
> remote a level here.
> 

This is what I had in v2 [1], which your bot pointed out is an unexpected
if-statement [2]. Or should I have wrapped it in an allOf: even though it
was a single if:?

    jernberg % pip install --upgrade dtschema
    Requirement already satisfied: dtschema in ./.venv/lib/python3.13/site-packages (2025.2)

[1]: https://lore.kernel.org/linux-crypto/20250527071552.1424997-4-john.ernberg@actia.se/
[2]: https://lore.kernel.org/linux-crypto/174833819381.3537254.5508047100817417003.robh@kernel.org/

Would you mind also letting me know the command line you run validation
with in the CI? I didn't see the v2 (at first, needed W=1 for that) nor
the v3 complaint in my runs before sending.

Thanks! // John Ernberg

> > +      patternProperties:
> > +        '^jr@[0-9a-f]+$':
> > +          type: object
> > +          properties:
> > +            compatible:
> > +              contains:
> > +                const: fsl,imx8qm-job-ring
> > +    then:
> > +      patternProperties:
> > +        '^jr@[0-9a-f]+$':
> > +          type: object
> > +          required:
> > +            - power-domains
> > +    else:
> > +      patternProperties:
> > +        '^jr@[0-9a-f]+$':
> > +          type: object
> > +          properties:
> > +            power-domains: false
> > +
> >  additionalProperties: false
> >  
> >  examples:
> > -- 
> > 2.49.0