[PATCH 1/1] dt-bindings: mmc: mxs-mmc: change ref to mmc-controller-common.yaml from mmc-controller.yaml

[Stefan Wahren]

Hi Frank,

thanks for the patch.

Am 29.05.25 um 00:24 schrieb Frank Li:
> Change ref to mmc-controller-common.yaml from mmc-controller.yaml because
> imx23/imx28 use dual mode controller (spi and mmc). So default dts node
> name use spi instead of mmc. The legancy reason, it use difference
legacy reason ?
> compatible string to distringuish work mode (spi / mmc).
>
> Fix below CHECK_DTB warnings:
> arch/arm/boot/dts/nxp/mxs/imx23-olinuxino.dtb: spi at 80010000 (fsl,imx23-mmc): $nodename:0: 'spi at 80010000' does not match '^mmc(@.*)?$'
>
> Additional add clocks property.
>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
>   Documentation/devicetree/bindings/mmc/mxs-mmc.yaml | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
> index 32e512a68ed61..ca40ca92f858d 100644
> --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.yaml
> @@ -17,7 +17,7 @@ description: |
>     and the properties used by the mxsmmc driver.
>   
>   allOf:
> -  - $ref: mmc-controller.yaml
> +  - $ref: mmc-controller-common.yaml#
>   
>   properties:
>     compatible:
> @@ -31,6 +31,9 @@ properties:
>     interrupts:
>       maxItems: 1
>   
> +  clocks:
> +    maxItems: 1
> +
The patch looks good, but shouldn't "clocks" be a required property ?
>     dmas:
>       maxItems: 1
>