[PATCH v1 1/2] ARM: dts: stm32: add support of stm32mp157f-dk2 board

[Alexandre TORGUE]

Hi Himanshu

On 5/27/25 08:36, Himanshu Bhavani wrote:
> Hi Alexandre,
> 
>> Hi Himanshu
>>
>> On 5/24/25 12:03, Himanshu Bhavani wrote:
>>> STM32MP157F is similar to the STM32MP157C, so reuse the existing
>>> stm32mp157c-dk2.dts as a base for the STM32MP157F-DK2 board.
>>>
>>> Datasheet: https://www.st.com/resource/en/data_brief/stm32mp157f-dk2.pdf
>>> Signed-off-by: Himanshu Bhavani <himanshu.bhavani at siliconsignals.io>
>>> ---
>>>     arch/arm/boot/dts/st/Makefile            |  3 ++-
>>>     arch/arm/boot/dts/st/stm32mp157f-dk2.dts | 15 +++++++++++++++
>>>     2 files changed, 17 insertions(+), 1 deletion(-)
>>>     create mode 100644 arch/arm/boot/dts/st/stm32mp157f-dk2.dts
>>>
>>> diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
>>> index 60d55516f723..38179638e5eb 100644
>>> --- a/arch/arm/boot/dts/st/Makefile
>>> +++ b/arch/arm/boot/dts/st/Makefile
>>> @@ -70,7 +70,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
>>>         stm32mp157c-lxa-tac-gen2.dtb \
>>>         stm32mp157c-odyssey.dtb \
>>>         stm32mp157c-osd32mp1-red.dtb \
>>> -     stm32mp157c-phycore-stm32mp1-3.dtb
>>> +     stm32mp157c-phycore-stm32mp1-3.dtb \
>>> +     stm32mp157f-dk2.dtb
>>>     dtb-$(CONFIG_ARCH_U8500) += \
>>>         ste-snowball.dtb \
>>>         ste-hrefprev60-stuib.dtb \
>>> diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
>>> new file mode 100644
>>> index 000000000000..ab406b2c44c1
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
>>> @@ -0,0 +1,15 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * Copyright (C) 2025 Silicon Signals Pvt. Ltd.
>>> + *
>>> + * Author: Himanshu Bhavani <himanshu.bhavani at siliconsignals.io>
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "stm32mp157c-dk2.dts"
>>
>> In this case what is the aim of this series if you just use stm32mp157C
>> devicetree ?
> 
> This patch series aims to add support for the STM32MP157F board device
> tree. The primary motivation is to ensure that users working with the
> STM32MP157F variant have a reference DTS available. Currently, no such
> device tree exists, even though the STM32MP157F and STM32MP157C are
> largely similar.
> 
>> ST people (mainly Amélie) are preparing a full support of
>> STM32MP157F-DK2 leveraging the F variant compare to the C variant.
>> Series will be sent this week.
> 
> If ST is working on a dedicated DTS for the F variant, it's likely they are starting
> from the C variant as a base, this is exactly the approach I’ve taken here. At this
> stage, I have not included an SCMI-based version of the board since it hasn't
> been tested yet.

Please have a look on:

https://lore.kernel.org/all/20250527-stm32mp157f-dk2-v1-0-8aef885a4928@foss.st.com/

The idea is to have the same approach than for STM32MP13 and STM32MP25 
relying on SCMI and preparing the add of F variant feature: DVFS/cpufreq.

regards
alex


> Please let me know if you have any further suggestions.
> 
> 
> Best Regards,
> Himanshu
> 
>> Regards
>> Alex
>>
>>> +
>>> +/ {
>>> +     model = "STMicroelectronics STM32MP157F-DK2 Discovery Board";
>>> +     compatible = "st,stm32mp157f-dk2", "st,stm32mp157";
>>> +};