[PATCH] arm64: dts: morello: Add CMN PMU

[Robin Murphy]

Although CMN-Skeena is mildly modified for the Morello hardware
architecture, it still identifies itself as CMN-600 r3p1. Since
there are also no documented changes to its PMU functionality,
we can make the PMU accessible via the standard CMN-600 binding.
In general, PMU registers are non-functional on CMN Fast Models,
so this is only meaningful for the real SDP hardware.

Signed-off-by: Robin Murphy <robin.murphy at arm.com>
---
 arch/arm64/boot/dts/arm/morello-sdp.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/arm/morello-sdp.dts b/arch/arm64/boot/dts/arm/morello-sdp.dts
index cee49dee7571..42c85f450fa9 100644
--- a/arch/arm64/boot/dts/arm/morello-sdp.dts
+++ b/arch/arm64/boot/dts/arm/morello-sdp.dts
@@ -108,6 +108,13 @@ smmu_pcie: iommu at 4f400000 {
 		dma-coherent;
 	};
 
+	pmu at 50000000 {
+		compatible = "arm,cmn-600";
+		reg = <0x0 0x50000000 0x0 0x4000000>;
+		interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		arm,root-node = <0x804000>;
+	};
+
 	pcie_ctlr: pcie at 28c0000000 {
 		device_type = "pci";
 		compatible = "pci-host-ecam-generic";
-- 
2.39.2.101.g768bb238c484.dirty