[net-next v11 4/7] net: mtip: The L2 switch driver for imx287

[Lukasz Majewski]

Hi Paolo,

> On 5/13/25 7:31 AM, Lukasz Majewski wrote:
> >> On 5/4/25 4:55 PM, Lukasz Majewski wrote:  
> >>> +		/* This does 16 byte alignment, exactly what we
> >>> need.
> >>> +		 * The packet length includes FCS, but we don't
> >>> want to
> >>> +		 * include that when passing upstream as it
> >>> messes up
> >>> +		 * bridging applications.
> >>> +		 */
> >>> +		skb = netdev_alloc_skb(pndev, pkt_len +
> >>> NET_IP_ALIGN);
> >>> +		if (unlikely(!skb)) {
> >>> +			dev_dbg(&fep->pdev->dev,
> >>> +				"%s: Memory squeeze, dropping
> >>> packet.\n",
> >>> +				pndev->name);
> >>> +			pndev->stats.rx_dropped++;
> >>> +			goto err_mem;
> >>> +		} else {
> >>> +			skb_reserve(skb, NET_IP_ALIGN);
> >>> +			skb_put(skb, pkt_len);      /* Make room
> >>> */
> >>> +			skb_copy_to_linear_data(skb, data,
> >>> pkt_len);
> >>> +			skb->protocol = eth_type_trans(skb,
> >>> pndev);
> >>> +			napi_gro_receive(&fep->napi, skb);
> >>> +		}
> >>> +
> >>> +		bdp->cbd_bufaddr =
> >>> dma_map_single(&fep->pdev->dev, data,
> >>> +
> >>> bdp->cbd_datlen,
> >>> +
> >>> DMA_FROM_DEVICE);
> >>> +		if (unlikely(dma_mapping_error(&fep->pdev->dev,
> >>> +
> >>> bdp->cbd_bufaddr))) {
> >>> +			dev_err(&fep->pdev->dev,
> >>> +				"Failed to map descriptor rx
> >>> buffer\n");
> >>> +			pndev->stats.rx_errors++;
> >>> +			pndev->stats.rx_dropped++;
> >>> +			dev_kfree_skb_any(skb);
> >>> +			goto err_mem;
> >>> +		}    
> >>
> >> This is doing the mapping and ev. dropping the skb _after_ pushing
> >> the skb up the stack, you must attempt the mapping first.  
> > 
> > I've double check it - the code seems to be correct.
> > 
> > This code is a part of mtip_switch_rx() function, which handles
> > receiving data.
> > 
> > First, on probe, the initial dma memory is mapped for MTIP received
> > data.
> > 
> > When we receive data, it is processed and afterwards it is "pushed"
> > up to the network stack.
> > 
> > As a last step we do map memory for next, incoming data and leave
> > the function.
> > 
> > Hence, IMHO, the order is OK and this part shall be left as is.  
> 
> First thing first, I'm sorry for lagging behind. This fell outside my
> radar. Let's keep the conversation on the new patch version, it should
> help me to avoid repeating this mistake.

+1

> 
> /P
> 




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20250527/a1caf8f6/attachment.sig>