[PATCH 0/2] TI: K3: Switch MCU R5F cluster into Split mode

[Nishanth Menon]

On 13:04-20250522, Beleswar Padhi wrote:
> Several TI K3 SoCs like J7200, J721E, J721S2, J784S4 and J742S2 have a
> R5F cluster in the MCU domain which is configured for LockStep mode at
> the moment. Switch this R5F cluster to Split mode by default in all
> corresponding board level DTs to maximize the number of R5F cores.

Why? I can read the patch to understand what you are trying to do, but
the rationale needs to be explained.

> 
> Corresponding support to shutdown MCU R5F core 1 on SoC power on have
> been posted in U-Boot:
> https://lore.kernel.org/all/20250522071828.285462-1-b-padhi@ti.com/
> 
> While at it, correct the firmware-name property for MCU R5F cores of
> J742S2 SoC in [PATCH 1/2].
> 
> Testing Done:
> 1. Tested that each patch does not generate any new warnings/errors.
> 2. Build test on all existing TI K3 platforms.
> 3. Tested U-Boot and Linux load of MCU R5F core in split mode on all
> applicable boards (AM68-SK, AM69-SK, J7200-EVM, J721E-EVM, J721S2-EVM,
> J784S4-evm, J742S2-EVM)
> 
> Test logs:
> https://gist.github.com/3V3RYONE/ee8e3cb9aa5f4c5c00b059b9c14bfa98
> 
> Thanks,
> Beleswar
> 
> Beleswar Padhi (2):
>   arm64: dts: ti: k3-j742s2-mcu-wakeup: Override firmware-name for MCU
>     R5F cores
>   arm64: dts: ti: k3: Switch MCU R5F cluster to Split-mode

NAK! We are once again churning downstream users again and for what
reason - coverletter and the patch is vague on that!

I would prefer the entire remote proc dts stuff cleaned up once for all
in a comprehensive series.

Let me be clear (once again): We DO NOT break backward compatibility.
We do not break downstream users without a clear cut rationale. We do
not break all other ecosystems depending on device tree without a very
very solid reason.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D