[PATCH v3 5/5] media: i2c: imx214: Remove hard-coded external clock frequency

[André Apitzsch via B4 Relay]

From: André Apitzsch <git at apitzsch.eu>

Instead rely on the rate set on the clock (using assigned-clock-rates
etc.)

Signed-off-by: André Apitzsch <git at apitzsch.eu>
---
 drivers/media/i2c/imx214.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c
index 19b494c08ece9894de67a4ee34c6f8e6e2708e41..264e897ec6e8e3d2fcd9d58db82090c7dd85d526 100644
--- a/drivers/media/i2c/imx214.c
+++ b/drivers/media/i2c/imx214.c
@@ -32,7 +32,6 @@
 
 #define IMX214_REG_FAST_STANDBY_CTRL	CCI_REG8(0x0106)
 
-#define IMX214_DEFAULT_CLK_FREQ	24000000
 #define IMX214_DEFAULT_LINK_FREQ	600000000
 /* Keep wrong link frequency for backward compatibility */
 #define IMX214_DEFAULT_LINK_FREQ_LEGACY	480000000
@@ -1402,11 +1401,6 @@ static int imx214_probe(struct i2c_client *client)
 		return dev_err_probe(dev, PTR_ERR(imx214->xclk),
 				     "failed to get xclk\n");
 
-	ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
-	if (ret)
-		return dev_err_probe(dev, ret,
-				     "failed to set xclk frequency\n");
-
 	ret = imx214_get_regulators(dev, imx214);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to get regulators\n");

-- 
2.49.0