[PATCH 3/3] ARM: dts: mxs: support i.MX28 Amarula rmm board

[Marc Kleine-Budde]

On 21.05.2025 11:28:22, Dario Binacchi wrote:
> The board includes the following resources:
>  - 256 Mbytes NAND Flash
>  - 256 Mbytes SRAM
>  - LCD-TFT controller
>  - CAN

[...]

> +&can0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&can0_pins_a>;
> +	xceiver-supply = <&reg_3v3>;

Since v6.15-rc1 (d80bfde3c57a ("can: flexcan: add transceiver
capabilities")), the flexcan driver supports CAN transceivers via the
phy framework, see drivers/phy/phy-can-transceiver.c. Can you make use
of it?

regards,
Marc

-- 
Pengutronix e.K.                 | Marc Kleine-Budde          |
Embedded Linux                   | https://www.pengutronix.de |
Vertretung Nürnberg              | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax:   +49-5121-206917-9   |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20250521/183f8f3f/attachment.sig>