[PATCH v2 1/2] dt-bindings: stm32: add STM32MP21 clocks and reset bindings

[Rob Herring (Arm)]

On Tue, 20 May 2025 17:28:37 +0200, Gabriel Fernandez wrote:
> Adds clock and reset binding entries for STM32MP21 SoC family.
> 
> Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon at foss.st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez at foss.st.com>
> ---
>  .../bindings/clock/st,stm32mp21-rcc.yaml           | 204 ++++++++++
>  include/dt-bindings/clock/st,stm32mp21-rcc.h       | 426 +++++++++++++++++++++
>  include/dt-bindings/reset/st,stm32mp21-rcc.h       | 138 +++++++
>  3 files changed, 768 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/st,stm32mp21-rcc.yaml: properties:access-controllers: {'description': 'phandle to the rifsc device to check access right.', 'items': [{'description': 'phandle to access controller'}], 'minItems': 1, 'maxItems': 1} should not be valid under {'required': ['maxItems']}
	hint: "maxItems" is not needed with an "items" list
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/clock/st,stm32mp21-rcc.yaml: properties:access-controllers: 'oneOf' conditional failed, one must be fixed:
	[{'description': 'phandle to access controller'}] is too short
	False schema does not allow 1
	hint: "minItems" is only needed if less than the "items" list length
	from schema $id: http://devicetree.org/meta-schemas/items.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250520-upstream_rcc_mp21-v2-1-3c776a6e5862@foss.st.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.