[PATCH 1/2] dt-bindings: stm32: add STM32MP21 clocks and reset bindings

[Gabriel FERNANDEZ]

On 5/19/25 16:42, ALOK TIWARI wrote:
>
>> +++ b/Documentation/devicetree/bindings/clock/st,stm32mp21-rcc.yaml
>> @@ -0,0 +1,200 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: 
>> https://urldefense.com/v3/__http://devicetree.org/schemas/clock/st,stm32mp21-rcc.yaml*__;Iw!!ACWV5N9M2RV99hQ!Nqfcj0yvl-cb4Mu6XFbLz7FVSHkQfpdQGRbVtM1EqANq9n_cdZZNBg-YGSqb-Nkm16LDOQ7TsRAIi2iDug6DIO8uPU0kq3E$
>> +$schema: 
>> https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!ACWV5N9M2RV99hQ!Nqfcj0yvl-cb4Mu6XFbLz7FVSHkQfpdQGRbVtM1EqANq9n_cdZZNBg-YGSqb-Nkm16LDOQ7TsRAIi2iDug6DIO8uLNFOSgg$
>> +
>> +title: STM32MP21 Reset Clock Controller
>> +
>> +maintainers:
>> +  - Gabriel Fernandez <gabriel.fernandez at foss.st.com>
>> +
>> +description: |
>> +  The RCC hardware block is both a reset and a clock controller.
>> +  RCC makes also power management (resume/supend).
>
> typo supend
>
Hi Alok,

Thanks for you review

done


>> +
>> +  See also::
>> +    include/dt-bindings/clock/st,stm32mp21-rcc.h
>> +    include/dt-bindings/reset/st,stm32mp21-rcc.h
>> +
> [clip]
>> +      - description: CK_SCMI_ICN_APB2 Peripheral bridge 2
>> +      - description: CK_SCMI_ICN_APB3 Peripheral bridge 3
>> +      - description: CK_SCMI_ICN_APB4 Peripheral bridge 4
>> +      - description: CK_SCMI_ICN_APB5 Peripheral bridge 5
>> +      - description: CK_SCMI_ICN_APBDBG Peripheral bridge for degub
>
> typo degub

done

Best regards,

Gabriel

>
>> +      - description: CK_SCMI_TIMG1 Peripheral bridge for timer1
>> +      - description: CK_SCMI_TIMG2 Peripheral bridge for timer2
>
> Thanks,
> Alok