[PATCH 07/10] perf: arm_spe: Add support for filtering on data source

[Leo Yan]

On Tue, May 06, 2025 at 12:41:39PM +0100, James Clark wrote:
> SPE_FEAT_FDS adds the ability to filter on the data source of packets.
> Like the other existing filters, enable filtering with PMSFCR_EL1.FDS
> when any of the filter bits are set.
> 
> Each bit maps to data sources 0-63 described by bits[0:5] in the data
> source packet (although the full range of data source is 16 bits so
> higher value data sources can't be filtered on). The filter is an OR of
> all the bits, so for example setting bits 0 and 3 filters packets from
> data sources 0 OR 3.
> 
> Signed-off-by: James Clark <james.clark at linaro.org>
> ---
>  drivers/perf/arm_spe_pmu.c | 31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c
> index 9309b846f642..d04318411f77 100644
> --- a/drivers/perf/arm_spe_pmu.c
> +++ b/drivers/perf/arm_spe_pmu.c
> @@ -87,6 +87,7 @@ struct arm_spe_pmu {
>  #define SPE_PMU_FEAT_INV_FILT_EVT		(1UL << 6)
>  #define SPE_PMU_FEAT_DISCARD			(1UL << 7)
>  #define SPE_PMU_FEAT_EFT			(1UL << 8)
> +#define SPE_PMU_FEAT_FDS			(1UL << 9)
>  #define SPE_PMU_FEAT_DEV_PROBED			(1UL << 63)
>  	u64					features;
>  
> @@ -232,6 +233,10 @@ static const struct attribute_group arm_spe_pmu_cap_group = {
>  #define ATTR_CFG_FLD_inv_event_filter_LO	0
>  #define ATTR_CFG_FLD_inv_event_filter_HI	63
>  
> +#define ATTR_CFG_FLD_data_src_filter_CFG	config4	/* PMSDSFR_EL1 */
> +#define ATTR_CFG_FLD_data_src_filter_LO	0
> +#define ATTR_CFG_FLD_data_src_filter_HI	63
> +
>  GEN_PMU_FORMAT_ATTR(ts_enable);
>  GEN_PMU_FORMAT_ATTR(pa_enable);
>  GEN_PMU_FORMAT_ATTR(pct_enable);
> @@ -248,6 +253,7 @@ GEN_PMU_FORMAT_ATTR(float_filter);
>  GEN_PMU_FORMAT_ATTR(float_filter_mask);
>  GEN_PMU_FORMAT_ATTR(event_filter);
>  GEN_PMU_FORMAT_ATTR(inv_event_filter);
> +GEN_PMU_FORMAT_ATTR(data_src_filter);
>  GEN_PMU_FORMAT_ATTR(min_latency);
>  GEN_PMU_FORMAT_ATTR(discard);
>  
> @@ -268,6 +274,7 @@ static struct attribute *arm_spe_pmu_formats_attr[] = {
>  	&format_attr_float_filter_mask.attr,
>  	&format_attr_event_filter.attr,
>  	&format_attr_inv_event_filter.attr,
> +	&format_attr_data_src_filter.attr,
>  	&format_attr_min_latency.attr,
>  	&format_attr_discard.attr,
>  	NULL,
> @@ -286,6 +293,9 @@ static umode_t arm_spe_pmu_format_attr_is_visible(struct kobject *kobj,
>  	if (attr == &format_attr_inv_event_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_INV_FILT_EVT))
>  		return 0;
>  
> +	if (attr == &format_attr_data_src_filter.attr && !(spe_pmu->features & SPE_PMU_FEAT_FDS))
> +		return 0;
> +
>  	if ((attr == &format_attr_branch_filter_mask.attr ||
>  	     attr == &format_attr_load_filter_mask.attr ||
>  	     attr == &format_attr_store_filter_mask.attr ||
> @@ -406,6 +416,9 @@ static u64 arm_spe_event_to_pmsfcr(struct perf_event *event)
>  	if (ATTR_CFG_GET_FLD(attr, inv_event_filter))
>  		reg |= PMSFCR_EL1_FnE;
>  
> +	if (ATTR_CFG_GET_FLD(attr, data_src_filter))
> +		reg |= PMSFCR_EL1_FDS;
> +
>  	if (ATTR_CFG_GET_FLD(attr, min_latency))
>  		reg |= PMSFCR_EL1_FL;
>  
> @@ -430,6 +443,12 @@ static u64 arm_spe_event_to_pmslatfr(struct perf_event *event)
>  	return FIELD_PREP(PMSLATFR_EL1_MINLAT, ATTR_CFG_GET_FLD(attr, min_latency));
>  }
>  
> +static u64 arm_spe_event_to_pmsdsfr(struct perf_event *event)
> +{
> +	struct perf_event_attr *attr = &event->attr;
> +	return ATTR_CFG_GET_FLD(attr, data_src_filter);
> +}

Seems to me, arm_spe_event_to_pmsdsfr() is not needed as it does not do
any conversion from event config to register value.  So simply read the
field value in opened code would be fine.

I am fine to keep it and would leave SPE driver maintainers to decide
which is preferring.  Otherwise, LGTM:

Reviewed-by: Leo Yan <leo.yan at arm.com>

> +
>  static void arm_spe_pmu_pad_buf(struct perf_output_handle *handle, int len)
>  {
>  	struct arm_spe_pmu_buf *buf = perf_get_aux(handle);
> @@ -788,6 +807,10 @@ static int arm_spe_pmu_event_init(struct perf_event *event)
>  	if (arm_spe_event_to_pmsnevfr(event) & arm_spe_pmsevfr_res0(spe_pmu->pmsver))
>  		return -EOPNOTSUPP;
>  
> +	if (arm_spe_event_to_pmsdsfr(event) &&
> +	    !(spe_pmu->features & SPE_PMU_FEAT_FDS))
> +		return -EOPNOTSUPP;
> +
>  	if (attr->exclude_idle)
>  		return -EOPNOTSUPP;
>  
> @@ -857,6 +880,11 @@ static void arm_spe_pmu_start(struct perf_event *event, int flags)
>  		write_sysreg_s(reg, SYS_PMSNEVFR_EL1);
>  	}
>  
> +	if (spe_pmu->features & SPE_PMU_FEAT_FDS) {
> +		reg = arm_spe_event_to_pmsdsfr(event);
> +		write_sysreg_s(reg, SYS_PMSDSFR_EL1);
> +	}
> +
>  	reg = arm_spe_event_to_pmslatfr(event);
>  	write_sysreg_s(reg, SYS_PMSLATFR_EL1);
>  
> @@ -1116,6 +1144,9 @@ static void __arm_spe_pmu_dev_probe(void *info)
>  	if (FIELD_GET(PMSIDR_EL1_EFT, reg))
>  		spe_pmu->features |= SPE_PMU_FEAT_EFT;
>  
> +	if (FIELD_GET(PMSIDR_EL1_FDS, reg))
> +		spe_pmu->features |= SPE_PMU_FEAT_FDS;
> +
>  	/* This field has a spaced out encoding, so just use a look-up */
>  	fld = FIELD_GET(PMSIDR_EL1_INTERVAL, reg);
>  	switch (fld) {
> 
> -- 
> 2.34.1
>