[net-next v11 4/7] net: mtip: The L2 switch driver for imx287

[Lukasz Majewski]

Hi Paolo,

> Hi Paolo,
> 
> > Hi Paolo,
> >   
> > > On 5/4/25 4:55 PM, Lukasz Majewski wrote:    
> > > > +		/* This does 16 byte alignment, exactly what we
> > > > need.
> > > > +		 * The packet length includes FCS, but we don't
> > > > want to
> > > > +		 * include that when passing upstream as it
> > > > messes up
> > > > +		 * bridging applications.
> > > > +		 */
> > > > +		skb = netdev_alloc_skb(pndev, pkt_len +
> > > > NET_IP_ALIGN);
> > > > +		if (unlikely(!skb)) {
> > > > +			dev_dbg(&fep->pdev->dev,
> > > > +				"%s: Memory squeeze, dropping
> > > > packet.\n",
> > > > +				pndev->name);
> > > > +			pndev->stats.rx_dropped++;
> > > > +			goto err_mem;
> > > > +		} else {
> > > > +			skb_reserve(skb, NET_IP_ALIGN);
> > > > +			skb_put(skb, pkt_len);      /* Make
> > > > room */
> > > > +			skb_copy_to_linear_data(skb, data,
> > > > pkt_len);
> > > > +			skb->protocol = eth_type_trans(skb,
> > > > pndev);
> > > > +			napi_gro_receive(&fep->napi, skb);
> > > > +		}
> > > > +
> > > > +		bdp->cbd_bufaddr =
> > > > dma_map_single(&fep->pdev->dev, data,
> > > > +
> > > > bdp->cbd_datlen,
> > > > +
> > > > DMA_FROM_DEVICE);
> > > > +		if (unlikely(dma_mapping_error(&fep->pdev->dev,
> > > > +
> > > > bdp->cbd_bufaddr))) {
> > > > +			dev_err(&fep->pdev->dev,
> > > > +				"Failed to map descriptor rx
> > > > buffer\n");
> > > > +			pndev->stats.rx_errors++;
> > > > +			pndev->stats.rx_dropped++;
> > > > +			dev_kfree_skb_any(skb);
> > > > +			goto err_mem;
> > > > +		}      
> > > 
> > > This is doing the mapping and ev. dropping the skb _after_ pushing
> > > the skb up the stack, you must attempt the mapping first.    
> > 
> > I've double check it - the code seems to be correct.
> > 
> > This code is a part of mtip_switch_rx() function, which handles
> > receiving data.
> > 
> > First, on probe, the initial dma memory is mapped for MTIP received
> > data.
> > 
> > When we receive data, it is processed and afterwards it is "pushed"
> > up to the network stack.
> > 
> > As a last step we do map memory for next, incoming data and leave
> > the function.
> > 
> > Hence, IMHO, the order is OK and this part shall be left as is.  
> 
> Is the explanation sufficient?

I would do appreciate your feedback as your OK is required to prepare
v12, so I would had the opportunity to have this patch set accepted to
net-next before cut-off date.

Thanks in advance for your help.

> 
> >   
> > >     
> > > > +static void mtip_free_buffers(struct net_device *dev)
> > > > +{
> > > > +	struct mtip_ndev_priv *priv = netdev_priv(dev);
> > > > +	struct switch_enet_private *fep = priv->fep;
> > > > +	struct sk_buff *skb;
> > > > +	struct cbd_t *bdp;
> > > > +	int i;
> > > > +
> > > > +	bdp = fep->rx_bd_base;
> > > > +	for (i = 0; i < RX_RING_SIZE; i++) {
> > > > +		skb = fep->rx_skbuff[i];
> > > > +
> > > > +		if (bdp->cbd_bufaddr)
> > > > +			dma_unmap_single(&fep->pdev->dev,
> > > > bdp->cbd_bufaddr,
> > > > +					 MTIP_SWITCH_RX_FRSIZE,
> > > > +					 DMA_FROM_DEVICE);
> > > > +		if (skb)
> > > > +			dev_kfree_skb(skb);      
> > > 
> > > I suspect that on error paths mtip_free_buffers() can be invoked
> > > multiple consecutive times with any successful allocation in
> > > between: skb will be freed twice. Likely you need to clear
> > > fep->rx_skbuff[i] here.    
> > 
> > +1 - I will add it with v12.
> >   
> > > 
> > > Side note: this patch is way too big for a proper review: you need
> > > to break it in multiple smaller ones, introducing the basic
> > > features separately.
> > > 
> > > Cheers,
> > > 
> > > Paolo
> > >     
> > 
> > 
> > 
> > 
> > Best regards,
> > 
> > Lukasz Majewski
> > 
> > --
> > 
> > DENX Software Engineering GmbH,      Managing Director: Erika Unter
> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > lukma at denx.de  
> 
> 
> 
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> lukma at denx.de




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20250519/44236f83/attachment.sig>