[PATCH 03/10] PCI: exynos: Reorder MACROs to maintain consistency

[Shradha Todi]

Exynos PCI file follows MACRO definition order where
register offset is defined in ascending order and each
bit field within the offset is defined right after offset
definition. Some MACROs are out of order and so reorder
those MACROs to maintain consistency.

Suggested-by: Hrishikesh Dileep <hrishikesh.d at samsung.com>
Signed-off-by: Shradha Todi <shradha.t at samsung.com>
---
 drivers/pci/controller/dwc/pci-exynos.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-exynos.c b/drivers/pci/controller/dwc/pci-exynos.c
index 990aaa16b132..286f4987d56f 100644
--- a/drivers/pci/controller/dwc/pci-exynos.c
+++ b/drivers/pci/controller/dwc/pci-exynos.c
@@ -27,11 +27,11 @@
 
 /* PCIe ELBI registers */
 #define EXYNOS_PCIE_IRQ_PULSE			0x000
+#define EXYNOS_PCIE_IRQ_EN_PULSE		0x00c
 #define EXYNOS_IRQ_INTA_ASSERT			BIT(0)
 #define EXYNOS_IRQ_INTB_ASSERT			BIT(2)
 #define EXYNOS_IRQ_INTC_ASSERT			BIT(4)
 #define EXYNOS_IRQ_INTD_ASSERT			BIT(6)
-#define EXYNOS_PCIE_IRQ_EN_PULSE		0x00c
 #define EXYNOS_PCIE_IRQ_EN_LEVEL		0x010
 #define EXYNOS_PCIE_IRQ_EN_SPECIAL		0x014
 #define EXYNOS_PCIE_SW_WAKE			0x018
@@ -42,12 +42,12 @@
 #define EXYNOS_PCIE_NONSTICKY_RESET		0x024
 #define EXYNOS_PCIE_APP_INIT_RESET		0x028
 #define EXYNOS_PCIE_APP_LTSSM_ENABLE		0x02c
+#define EXYNOS_PCIE_ELBI_LTSSM_ENABLE		0x1
 #define EXYNOS_PCIE_ELBI_RDLH_LINKUP		0x074
 #define EXYNOS_PCIE_ELBI_XMLH_LINKUP		BIT(4)
-#define EXYNOS_PCIE_ELBI_LTSSM_ENABLE		0x1
 #define EXYNOS_PCIE_ELBI_SLV_AWMISC		0x11c
 #define EXYNOS_PCIE_ELBI_SLV_ARMISC		0x120
-#define EXYNOS_PCIE_ELBI_SLV_DBI_ENABLE	BIT(21)
+#define EXYNOS_PCIE_ELBI_SLV_DBI_ENABLE		BIT(21)
 
 struct exynos_pcie {
 	struct dw_pcie			pci;
-- 
2.49.0