[PATCH 4/6] arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node

Heiko Stuebner heiko at sntech.de
Sun May 18 15:04:46 PDT 2025


The non-mmio pinctrl node is not supposed to be inside the soc simple-bus
as dtc points out:

../arch/arm64/boot/dts/rockchip/rk3528.dtsi:870.20-936.5: Warning (simple_bus_reg): /soc/pinctrl: missing or empty reg/ranges property

Move the pinctrl node outside and adapt the indentation.

Signed-off-by: Heiko Stuebner <heiko at sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3528.dtsi | 136 +++++++++++------------
 1 file changed, 68 insertions(+), 68 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index b2724c969a76..d1c72b52aa4e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -95,6 +95,74 @@ scmi_clk: protocol at 14 {
 		};
 	};
 
+	pinctrl: pinctrl {
+		compatible = "rockchip,rk3528-pinctrl";
+		rockchip,grf = <&ioc_grf>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio at ff610000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xff610000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio at ffaf0000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffaf0000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 32 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio at ffb00000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb00000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 64 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio3: gpio at ffb10000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb10000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 96 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio4: gpio at ffb20000 {
+			compatible = "rockchip,gpio-bank";
+			reg = <0x0 0xffb20000 0x0 0x200>;
+			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 128 32>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
@@ -866,74 +934,6 @@ dmac: dma-controller at ffd60000 {
 			#dma-cells = <1>;
 			arm,pl330-periph-burst;
 		};
-
-		pinctrl: pinctrl {
-			compatible = "rockchip,rk3528-pinctrl";
-			rockchip,grf = <&ioc_grf>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			gpio0: gpio at ff610000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xff610000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO0>, <&cru DBCLK_GPIO0>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 0 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio1: gpio at ffaf0000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffaf0000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 32 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio at ffb00000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffb00000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
-				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 64 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio at ffb10000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffb10000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 96 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio at ffb20000 {
-				compatible = "rockchip,gpio-bank";
-				reg = <0x0 0xffb20000 0x0 0x200>;
-				clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				gpio-ranges = <&pinctrl 0 128 32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-		};
 	};
 };
 
-- 
2.47.2




More information about the linux-arm-kernel mailing list