[PATCH 7/9] arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_3V3

[Dario Binacchi]

From: Wolfgang Birkner <wolfgang.birkner at bshg.com>

Buck4 is called Buck6 in the BD71847 datasheet. This buck supports
2.6...3.3V. Set the minimum allowed value.

Signed-off-by: Wolfgang Birkner <wolfgang.birkner at bshg.com>
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
index 81fa0a8767e2..04112a83b1d3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-common.dtsi
@@ -144,7 +144,7 @@ buck3_reg: BUCK3 {
 			buck4_reg: BUCK4 {
 				/* PMIC_BUCK6 - VDD_3V3 */
 				regulator-name = "buck4";
-				regulator-min-microvolt = <3000000>;
+				regulator-min-microvolt = <2600000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
-- 
2.43.0