[PATCH 0/9] DTS updates for BSH SMM S2[PRO] boards

[Dario Binacchi]

The series aims to upstream some parts of the DTS that are currently found
in the kernel used in the field. This is the first in a series of
activities intended to eventually lead to the use of an official kernel.


Karthikdatt Anantharamrao (1):
  arm64: dts: imx8mn-bsh-smm-s2-common: Enable GPU for smms2 and
    smms2pro

Michael Trimarchi (3):
  arm64: dts: imx8mn-bsh-smm-s2-common: Define suspend voltage threshold
  arm64: dts: imx8mn-bsh-smm-s2-common: Leave regulator under hw state
    machine
  arm64: dts: imx8mn-bsh-smm-s2-common: Keep wifi enable during suspend

Simon Holesch (1):
  arm64: dts: imx8mn-bsh-smm-s2-common: Pull Up Console UART pins

Wolfgang Birkner (4):
  arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for
    VDD_DRAM_VPU_GPU
  arm64: dts: imx8mn-bsh-smm-s2-common: Set minimum value for VDD_3V3
  arm64: dts: imx8mn-bsh-smm-s2-common: Increase drive strength of pmic
    irq
  arm64: dts: imx8mn-bsh-smm-s2-common: Disable PMIC SNVS reset target
    state

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   | 31 +++++++++++++++----
 1 file changed, 25 insertions(+), 6 deletions(-)

-- 
2.43.0