[PATCH 3/3] media: allegro-dvt: Add DT-bindings for the Gen 3 IP

[Rob Herring (Arm)]

On Sun, 11 May 2025 16:47:34 +0200, Yassine Ouaissa wrote:
> Add the device-tree bindings for the allegro-dvt Gen 3 IP decoders, and
> update the MAINTAINERS file.
> 
> Signed-off-by: Yassine Ouaissa <yassine.ouaissa at allegrodvt.com>
> ---
>  .../bindings/media/allegrodvt,al300-vdec.yaml | 86 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 87 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.yaml:52:3: [error] syntax error: could not find expected ':' (syntax)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.yaml: ignoring, error parsing file
./Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.yaml:52:3: could not find expected ':'
make[2]: *** Deleting file 'Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.example.dts'
Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.yaml:52:3: could not find expected ':'
make[2]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/media/allegrodvt,al300-vdec.example.dts] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/builds/robherring/dt-review-ci/linux/Makefile:1527: dt_binding_check] Error 2
make: *** [Makefile:248: __sub-make] Error 2

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250511144752.504162-4-yassine.ouaissa@allegrodvt.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.