[net-next PATCH v3 07/11] dt-bindings: net: ethernet-controller: permit to define multiple PCS

[Christian Marangi]

Drop the limitation of a single PCS in pcs-handle property. Multiple PCS
can be defined for an ethrnet-controller node to support various PHY
interface mode type.

It's very common for SoCs to have a 2 or more dedicated PCS for Base-X
(for example SGMII, 1000base-x, 2500base-x, ...) and Base-R (for example
USXGMII,10base-r, ...) with the MAC selecting one of the other based on
the attached PHY.

Signed-off-by: Christian Marangi <ansuelsmth at gmail.com>
---
 Documentation/devicetree/bindings/net/ethernet-controller.yaml | 2 --
 1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index 7cbf11bbe99c..60605b34d242 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -84,8 +84,6 @@ properties:
 
   pcs-handle:
     $ref: /schemas/types.yaml#/definitions/phandle-array
-    items:
-      maxItems: 1
     description:
       Specifies a reference to a node representing a PCS PHY device on a MDIO
       bus to link with an external PHY (phy-handle) if exists.
-- 
2.48.1