[PATCH 2/3] arm64: dts: rockchip: reorganise common rock5* nodes

Sebastian Reichel sebastian.reichel at collabora.com
Fri May 9 06:13:11 PDT 2025


Hi,

On Fri, May 09, 2025 at 02:31:42PM +0200, Nicolas Frattaroli wrote:
> In preparation for the addition of a device tree for ROCK 5T, reorganise
> the already existing ROCK 5B and ROCK 5B+ device trees. All
> functionality shared between just 5B and 5B+ is moved into the shared
> rk3588-rock-5b.dtsi, whereas all nodes that will be shared with the ROCK
> 5T as well are now present in rk3588-rock-5b-5bp-5t.dtsi, which the
> former includes.
> 
> Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli at collabora.com>
> ---
>  .../boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi   | 1012 ++++++++++++++++++++
>  arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi   | 1012 +-------------------
>  2 files changed, 1020 insertions(+), 1004 deletions(-)

This is why I send the first two patches separately in my ROCK 5B+
series and asked for them to be squashed. It's a pain to review it
the way you send it out :)

The good thing in your case is, that we are just moving things from
dtsi without involving a dts, so you can split it up in a bisectable
way:

patch 1:
 - rename rk3588-rock-5b.dtsi to rk3588-rock-5b-5bp-5t.dtsi (no changes)
 - change any include of rk3588-rock-5b.dtsi to rk3588-rock-5b-5bp-5t.dtsi

patch 2:
 - create rk3588-rock-5b.dtsi and move over the relevant stuff from rk3588-rock-5b-5bp-5t.dtsi
 - change back any include of rk3588-rock-5b-5bp-5t.dtsi to rk3588-rock-5b.dtsi

This is fully bisectable and will give you easy to review patches :)

Greetings,

-- Sebastian

> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..f086f0ff9f65b514ba89f04f4614a6c0c6abefff
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
> @@ -0,0 +1,1012 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> +#include <dt-bindings/usb/pd.h>
> +#include "rk3588.dtsi"
> +
> +/ {
> +	aliases {
> +		mmc0 = &sdhci;
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial2:1500000n8";
> +	};
> +
> +	hdmi0-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi0_con_in: endpoint {
> +				remote-endpoint = <&hdmi0_out_con>;
> +			};
> +		};
> +	};
> +
> +	hdmi1-con {
> +		compatible = "hdmi-connector";
> +		type = "a";
> +
> +		port {
> +			hdmi1_con_in: endpoint {
> +				remote-endpoint = <&hdmi1_out_con>;
> +			};
> +		};
> +	};
> +
> +	fan: pwm-fan {
> +		compatible = "pwm-fan";
> +		cooling-levels = <0 120 150 180 210 240 255>;
> +		fan-supply = <&vcc5v0_sys>;
> +		pwms = <&pwm1 0 50000 0>;
> +		#cooling-cells = <2>;
> +	};
> +
> +	rfkill-bt {
> +		compatible = "rfkill-gpio";
> +		label = "rfkill-m2-bt";
> +		radio-type = "bluetooth";
> +		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	vcc12v_dcin: regulator-vcc12v-dcin {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc12v_dcin";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <12000000>;
> +		regulator-max-microvolt = <12000000>;
> +	};
> +
> +	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		regulator-name = "vcc3v3_pcie2x1l0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <50000>;
> +		vin-supply = <&vcc5v0_sys>;
> +		status = "disabled";
> +	};
> +
> +	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc3v3_pcie2x1l2";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <5000>;
> +		vin-supply = <&vcc_3v3_s3>;
> +	};
> +
> +	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pcie3_vcc3v3_en>;
> +		regulator-name = "vcc3v3_pcie30";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		startup-delay-us = <5000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc5v0_host: regulator-vcc5v0-host {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_host";
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc5v0_sys: regulator-vcc5v0-sys {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc5v0_sys";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc12v_dcin>;
> +	};
> +
> +	vbus5v0_typec: vbus5v0-typec {
> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vbus5v0_typec_en>;
> +		regulator-name = "vbus5v0_typec";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
> +	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcc_1v1_nldo_s3";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1100000>;
> +		regulator-max-microvolt = <1100000>;
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +};
> +
> +&combphy0_ps {
> +	status = "okay";
> +};
> +
> +&combphy1_ps {
> +	status = "okay";
> +};
> +
> +&combphy2_psu {
> +	status = "okay";
> +};
> +
> +&cpu_b0 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b1 {
> +	cpu-supply = <&vdd_cpu_big0_s0>;
> +};
> +
> +&cpu_b2 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_b3 {
> +	cpu-supply = <&vdd_cpu_big1_s0>;
> +};
> +
> +&cpu_l0 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l1 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l2 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&cpu_l3 {
> +	cpu-supply = <&vdd_cpu_lit_s0>;
> +};
> +
> +&gpu {
> +	mali-supply = <&vdd_gpu_s0>;
> +	status = "okay";
> +};
> +
> +&hdmi0 {
> +	status = "okay";
> +};
> +
> +&hdmi0_in {
> +	hdmi0_in_vp0: endpoint {
> +		remote-endpoint = <&vp0_out_hdmi0>;
> +	};
> +};
> +
> +&hdmi0_out {
> +	hdmi0_out_con: endpoint {
> +		remote-endpoint = <&hdmi0_con_in>;
> +	};
> +};
> +
> +&hdmi0_sound {
> +	status = "okay";
> +};
> +
> +&hdmi1 {
> +	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
> +	&hdmim1_tx1_scl &hdmim1_tx1_sda>;
> +	status = "okay";
> +};
> +
> +&hdmi1_in {
> +	hdmi1_in_vp1: endpoint {
> +		remote-endpoint = <&vp1_out_hdmi1>;
> +	};
> +};
> +
> +&hdmi1_out {
> +	hdmi1_out_con: endpoint {
> +		remote-endpoint = <&hdmi1_con_in>;
> +	};
> +};
> +
> +&hdmi1_sound {
> +	status = "okay";
> +};
> +
> +&hdmi_receiver_cma {
> +	status = "okay";
> +};
> +
> +&hdmi_receiver {
> +	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
> +	pinctrl-names = "default";
> +};
> +
> +&hdptxphy0 {
> +	status = "okay";
> +};
> +
> +&hdptxphy1 {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0m2_xfer>;
> +	status = "okay";
> +
> +	vdd_cpu_big0_s0: regulator at 42 {
> +		compatible = "rockchip,rk8602";
> +		reg = <0x42>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big0_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +
> +	vdd_cpu_big1_s0: regulator at 43 {
> +		compatible = "rockchip,rk8603", "rockchip,rk8602";
> +		reg = <0x43>;
> +		fcs,suspend-voltage-selector = <1>;
> +		regulator-name = "vdd_cpu_big1_s0";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <550000>;
> +		regulator-max-microvolt = <1050000>;
> +		regulator-ramp-delay = <2300>;
> +		vin-supply = <&vcc5v0_sys>;
> +
> +		regulator-state-mem {
> +			regulator-off-in-suspend;
> +		};
> +	};
> +};
> +
> +&i2c4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c4m1_xfer>;
> +	status = "okay";
> +
> +	usbc0: usb-typec at 22 {
> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usbc0_int>;
> +		vbus-supply = <&vbus5v0_typec>;
> +		/*
> +		 * When the board is starting to send power-delivery messages
> +		 * too late (5 seconds according to the specification), the
> +		 * power-supply reacts with a hard-reset. That removes the
> +		 * power from VBUS for some time, which resets te whole board.
> +		 */
> +		status = "fail";
> +
> +		usb_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			data-role = "dual";
> +			power-role = "sink";
> +			try-power-role = "sink";
> +			op-sink-microwatt = <1000000>;
> +			sink-pdos =
> +				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>,
> +				<PDO_VAR(5000, 20000, 5000)>;
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					usbc0_role_sw: endpoint {
> +						remote-endpoint = <&dwc3_0_role_switch>;
> +					};
> +				};
> +
> +				port at 1 {
> +					reg = <1>;
> +					usbc0_orien_sw: endpoint {
> +						remote-endpoint = <&usbdp_phy0_orientation_switch>;
> +					};
> +				};
> +
> +				port at 2 {
> +					reg = <2>;
> +					dp_altmode_mux: endpoint {
> +						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
> +					};
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&i2c6 {
> +	status = "okay";
> +
> +	hym8563: rtc at 51 {
> +		compatible = "haoyu,hym8563";
> +		reg = <0x51>;
> +		#clock-cells = <0>;
> +		clock-output-names = "hym8563";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&hym8563_int>;
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-source;
> +	};
> +};
> +
> +&i2c7 {
> +	status = "okay";
> +
> +	es8316: audio-codec at 11 {
> +		compatible = "everest,es8316";
> +		reg = <0x11>;
> +		clocks = <&cru I2S0_8CH_MCLKOUT>;
> +		clock-names = "mclk";
> +		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
> +		assigned-clock-rates = <12288000>;
> +		#sound-dai-cells = <0>;
> +
> +		port {
> +			es8316_p0_0: endpoint {
> +				remote-endpoint = <&i2s0_8ch_p0_0>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2s0_8ch {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2s0_lrck
> +		     &i2s0_mclk
> +		     &i2s0_sclk
> +		     &i2s0_sdi0
> +		     &i2s0_sdo0>;
> +	status = "okay";
> +
> +	i2s0_8ch_p0: port {
> +		i2s0_8ch_p0_0: endpoint {
> +			dai-format = "i2s";
> +			mclk-fs = <256>;
> +			remote-endpoint = <&es8316_p0_0>;
> +		};
> +	};
> +};
> +
> +&i2s5_8ch {
> +	status = "okay";
> +};
> +
> +&i2s6_8ch {
> +	status = "okay";
> +};
> +
> +&package_thermal {
> +	polling-delay = <1000>;
> +
> +	trips {
> +		package_fan0: package-fan0 {
> +			temperature = <55000>;
> +			hysteresis = <2000>;
> +			type = "active";
> +		};
> +
> +		package_fan1: package-fan1 {
> +			temperature = <65000>;
> +			hysteresis = <2000>;
> +			type = "active";
> +		};
> +	};
> +
> +	cooling-maps {
> +		map0 {
> +			trip = <&package_fan0>;
> +			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> +		};
> +
> +		map1 {
> +			trip = <&package_fan1>;
> +			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> +		};
> +	};
> +};
> +
> +&pcie2x1l0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie2_0_rst>;
> +	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
> +	status = "okay";
> +};
> +
> +&pcie2x1l2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie2_2_rst>;
> +	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
> +	status = "okay";
> +};
> +
> +&pcie30phy {
> +	status = "okay";
> +};
> +
> +&pcie3x4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie3_rst>;
> +	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> +	vpcie3v3-supply = <&vcc3v3_pcie30>;
> +	status = "okay";
> +};
> +
> +&pd_gpu {
> +	domain-supply = <&vdd_gpu_s0>;
> +};
> +
> +&pinctrl {
> +	hym8563 {
> +		hym8563_int: hym8563-int {
> +			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pcie2 {
> +		pcie2_0_rst: pcie2-0-rst {
> +			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie2_2_rst: pcie2-2-rst {
> +			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	pcie3 {
> +		pcie3_rst: pcie3-rst {
> +			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
> +			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +
> +	usb {
> +		usbc0_int: usbc0-int {
> +			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +
> +		vbus5v0_typec_en: vbus5v0-typec-en {
> +			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> +		};
> +	};
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	vref-supply = <&avcc_1v8_s0>;
> +	status = "okay";
> +};
> +
> +&sdhci {
> +	bus-width = <8>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	mmc-hs400-1_8v;
> +	mmc-hs400-enhanced-strobe;
> +	status = "okay";
> +};
> +
> +&sdmmc {
> +	max-frequency = <200000000>;
> +	no-sdio;
> +	no-mmc;
> +	bus-width = <4>;
> +	cap-mmc-highspeed;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&vcc_3v3_s3>;
> +	vqmmc-supply = <&vccio_sd_s0>;
> +	status = "okay";
> +};
> +
> +&sfc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&fspim2_pins>;
> +	status = "okay";
> +
> +	flash at 0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +		spi-max-frequency = <104000000>;
> +		spi-rx-bus-width = <4>;
> +		spi-tx-bus-width = <1>;
> +		vcc-supply = <&vcc_3v3_s3>;
> +	};
> +};
> +
> +&spi2 {
> +	status = "okay";
> +	assigned-clocks = <&cru CLK_SPI2>;
> +	assigned-clock-rates = <200000000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
> +	num-cs = <1>;
> +
> +	pmic at 0 {
> +		compatible = "rockchip,rk806";
> +		spi-max-frequency = <1000000>;
> +		reg = <0x0>;
> +
> +		interrupt-parent = <&gpio0>;
> +		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
> +			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
> +
> +		system-power-controller;
> +
> +		vcc1-supply = <&vcc5v0_sys>;
> +		vcc2-supply = <&vcc5v0_sys>;
> +		vcc3-supply = <&vcc5v0_sys>;
> +		vcc4-supply = <&vcc5v0_sys>;
> +		vcc5-supply = <&vcc5v0_sys>;
> +		vcc6-supply = <&vcc5v0_sys>;
> +		vcc7-supply = <&vcc5v0_sys>;
> +		vcc8-supply = <&vcc5v0_sys>;
> +		vcc9-supply = <&vcc5v0_sys>;
> +		vcc10-supply = <&vcc5v0_sys>;
> +		vcc11-supply = <&vcc_2v0_pldo_s3>;
> +		vcc12-supply = <&vcc5v0_sys>;
> +		vcc13-supply = <&vcc_1v1_nldo_s3>;
> +		vcc14-supply = <&vcc_1v1_nldo_s3>;
> +		vcca-supply = <&vcc5v0_sys>;
> +
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		rk806_dvs1_null: dvs1-null-pins {
> +			pins = "gpio_pwrctrl1";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs2_null: dvs2-null-pins {
> +			pins = "gpio_pwrctrl2";
> +			function = "pin_fun0";
> +		};
> +
> +		rk806_dvs3_null: dvs3-null-pins {
> +			pins = "gpio_pwrctrl3";
> +			function = "pin_fun0";
> +		};
> +
> +		regulators {
> +			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_gpu_s0";
> +				regulator-enable-ramp-delay = <400>;
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_cpu_lit_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_log_s0: dcdc-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_log_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <550000>;
> +				regulator-max-microvolt = <950000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_vdenc_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_ddr_s0: dcdc-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <675000>;
> +				regulator-max-microvolt = <900000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_ddr_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			vdd2_ddr_s3: dcdc-reg6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vdd2_ddr_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +				};
> +			};
> +
> +			vcc_2v0_pldo_s3: dcdc-reg7 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <2000000>;
> +				regulator-max-microvolt = <2000000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vdd_2v0_pldo_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <2000000>;
> +				};
> +			};
> +
> +			vcc_3v3_s3: dcdc-reg8 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-name = "vcc_3v3_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <3300000>;
> +				};
> +			};
> +
> +			vddq_ddr_s0: dcdc-reg9 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-name = "vddq_ddr_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8_s3: dcdc-reg10 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc_1v8_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avcc_1v8_s0: pldo-reg1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "avcc_1v8_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_1v8_s0: pldo-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "vcc_1v8_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			avdd_1v2_s0: pldo-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1200000>;
> +				regulator-max-microvolt = <1200000>;
> +				regulator-name = "avdd_1v2_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vcc_3v3_s0: pldo-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <3300000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vcc_3v3_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vccio_sd_s0: pldo-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-ramp-delay = <12500>;
> +				regulator-name = "vccio_sd_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			pldo6_s3: pldo-reg6 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <1800000>;
> +				regulator-name = "pldo6_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <1800000>;
> +				};
> +			};
> +
> +			vdd_0v75_s3: nldo-reg1 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "vdd_0v75_s3";
> +
> +				regulator-state-mem {
> +					regulator-on-in-suspend;
> +					regulator-suspend-microvolt = <750000>;
> +				};
> +			};
> +
> +			vdd_ddr_pll_s0: nldo-reg2 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-name = "vdd_ddr_pll_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +					regulator-suspend-microvolt = <850000>;
> +				};
> +			};
> +
> +			avdd_0v75_s0: nldo-reg3 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "avdd_0v75_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_0v85_s0: nldo-reg4 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <850000>;
> +				regulator-max-microvolt = <850000>;
> +				regulator-name = "vdd_0v85_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +
> +			vdd_0v75_s0: nldo-reg5 {
> +				regulator-always-on;
> +				regulator-boot-on;
> +				regulator-min-microvolt = <750000>;
> +				regulator-max-microvolt = <750000>;
> +				regulator-name = "vdd_0v75_s0";
> +
> +				regulator-state-mem {
> +					regulator-off-in-suspend;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&tsadc {
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-0 = <&uart2m0_xfer>;
> +	status = "okay";
> +};
> +
> +&u2phy0 {
> +	status = "okay";
> +};
> +
> +&u2phy0_otg {
> +	status = "okay";
> +};
> +
> +&u2phy1 {
> +	status = "okay";
> +};
> +
> +&u2phy1_otg {
> +	status = "okay";
> +};
> +
> +&u2phy2 {
> +	status = "okay";
> +};
> +
> +&u2phy2_host {
> +	/* connected to USB hub, which is powered by vcc5v0_sys */
> +	phy-supply = <&vcc5v0_sys>;
> +	status = "okay";
> +};
> +
> +&u2phy3 {
> +	status = "okay";
> +};
> +
> +&u2phy3_host {
> +	phy-supply = <&vcc5v0_host>;
> +	status = "okay";
> +};
> +
> +&usbdp_phy0 {
> +	mode-switch;
> +	orientation-switch;
> +	status = "okay";
> +
> +	port {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		usbdp_phy0_orientation_switch: endpoint at 0 {
> +			reg = <0>;
> +			remote-endpoint = <&usbc0_orien_sw>;
> +		};
> +
> +		usbdp_phy0_dp_altmode_mux: endpoint at 1 {
> +			reg = <1>;
> +			remote-endpoint = <&dp_altmode_mux>;
> +		};
> +	};
> +};
> +
> +&usbdp_phy1 {
> +	status = "okay";
> +};
> +
> +&usb_host0_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host0_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host0_xhci {
> +	usb-role-switch;
> +	status = "okay";
> +
> +	port {
> +		dwc3_0_role_switch: endpoint {
> +			remote-endpoint = <&usbc0_role_sw>;
> +		};
> +	};
> +};
> +
> +&usb_host1_ehci {
> +	status = "okay";
> +};
> +
> +&usb_host1_ohci {
> +	status = "okay";
> +};
> +
> +&usb_host1_xhci {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&vop {
> +	status = "okay";
> +};
> +
> +&vop_mmu {
> +	status = "okay";
> +};
> +
> +&vp0 {
> +	vp0_out_hdmi0: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> +		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> +		remote-endpoint = <&hdmi0_in_vp0>;
> +	};
> +};
> +
> +&vp1 {
> +	vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
> +		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
> +		remote-endpoint = <&hdmi1_in_vp1>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
> index 314fdc0c1c20b25b0fdc5254f3b090586c169a00..e5c474e4d02a6582efc3bd704d95df95bf9fb0ee 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dtsi
> @@ -2,23 +2,9 @@
>  
>  /dts-v1/;
>  
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/leds/common.h>
> -#include <dt-bindings/soc/rockchip,vop2.h>
> -#include <dt-bindings/usb/pd.h>
> -#include "rk3588.dtsi"
> +#include "rk3588-rock-5b-5bp-5t.dtsi"
>  
>  / {
> -	aliases {
> -		mmc0 = &sdhci;
> -		mmc1 = &sdmmc;
> -		mmc2 = &sdio;
> -	};
> -
> -	chosen {
> -		stdout-path = "serial2:1500000n8";
> -	};
> -
>  	analog-sound {
>  		compatible = "audio-graph-card";
>  		label = "rk3588-es8316";
> @@ -36,28 +22,6 @@ analog-sound {
>  		pinctrl-0 = <&hp_detect>;
>  	};
>  
> -	hdmi0-con {
> -		compatible = "hdmi-connector";
> -		type = "a";
> -
> -		port {
> -			hdmi0_con_in: endpoint {
> -				remote-endpoint = <&hdmi0_out_con>;
> -			};
> -		};
> -	};
> -
> -	hdmi1-con {
> -		compatible = "hdmi-connector";
> -		type = "a";
> -
> -		port {
> -			hdmi1_con_in: endpoint {
> -				remote-endpoint = <&hdmi1_out_con>;
> -			};
> -		};
> -	};
> -
>  	leds {
>  		compatible = "gpio-leds";
>  		pinctrl-names = "default";
> @@ -71,452 +35,19 @@ led_rgb_b {
>  		};
>  	};
>  
> -	fan: pwm-fan {
> -		compatible = "pwm-fan";
> -		cooling-levels = <0 120 150 180 210 240 255>;
> -		fan-supply = <&vcc5v0_sys>;
> -		pwms = <&pwm1 0 50000 0>;
> -		#cooling-cells = <2>;
> -	};
> -
>  	rfkill {
>  		compatible = "rfkill-gpio";
>  		label = "rfkill-m2-wlan";
>  		radio-type = "wlan";
>  		shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
>  	};
> -
> -	rfkill-bt {
> -		compatible = "rfkill-gpio";
> -		label = "rfkill-m2-bt";
> -		radio-type = "bluetooth";
> -		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
> -	};
> -
> -	vcc12v_dcin: regulator-vcc12v-dcin {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc12v_dcin";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		regulator-min-microvolt = <12000000>;
> -		regulator-max-microvolt = <12000000>;
> -	};
> -
> -	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
> -		compatible = "regulator-fixed";
> -		enable-active-high;
> -		gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pcie2_0_vcc3v3_en>;
> -		regulator-name = "vcc3v3_pcie2x1l0";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		regulator-min-microvolt = <3300000>;
> -		regulator-max-microvolt = <3300000>;
> -		startup-delay-us = <50000>;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -
> -	vcc3v3_pcie2x1l2: regulator-vcc3v3-pcie2x1l2 {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc3v3_pcie2x1l2";
> -		regulator-min-microvolt = <3300000>;
> -		regulator-max-microvolt = <3300000>;
> -		startup-delay-us = <5000>;
> -		vin-supply = <&vcc_3v3_s3>;
> -	};
> -
> -	vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
> -		compatible = "regulator-fixed";
> -		enable-active-high;
> -		gpios = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pcie3_vcc3v3_en>;
> -		regulator-name = "vcc3v3_pcie30";
> -		regulator-min-microvolt = <3300000>;
> -		regulator-max-microvolt = <3300000>;
> -		startup-delay-us = <5000>;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -
> -	vcc5v0_host: regulator-vcc5v0-host {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc5v0_host";
> -		regulator-boot-on;
> -		regulator-always-on;
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -
> -	vcc5v0_sys: regulator-vcc5v0-sys {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc5v0_sys";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		vin-supply = <&vcc12v_dcin>;
> -	};
> -
> -	vbus5v0_typec: vbus5v0-typec {
> -		compatible = "regulator-fixed";
> -		enable-active-high;
> -		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&vbus5v0_typec_en>;
> -		regulator-name = "vbus5v0_typec";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -
> -	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
> -		compatible = "regulator-fixed";
> -		regulator-name = "vcc_1v1_nldo_s3";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		regulator-min-microvolt = <1100000>;
> -		regulator-max-microvolt = <1100000>;
> -		vin-supply = <&vcc5v0_sys>;
> -	};
> -};
> -
> -&combphy0_ps {
> -	status = "okay";
> -};
> -
> -&combphy1_ps {
> -	status = "okay";
> -};
> -
> -&combphy2_psu {
> -	status = "okay";
> -};
> -
> -&cpu_b0 {
> -	cpu-supply = <&vdd_cpu_big0_s0>;
> -};
> -
> -&cpu_b1 {
> -	cpu-supply = <&vdd_cpu_big0_s0>;
> -};
> -
> -&cpu_b2 {
> -	cpu-supply = <&vdd_cpu_big1_s0>;
> -};
> -
> -&cpu_b3 {
> -	cpu-supply = <&vdd_cpu_big1_s0>;
> -};
> -
> -&cpu_l0 {
> -	cpu-supply = <&vdd_cpu_lit_s0>;
> -};
> -
> -&cpu_l1 {
> -	cpu-supply = <&vdd_cpu_lit_s0>;
> -};
> -
> -&cpu_l2 {
> -	cpu-supply = <&vdd_cpu_lit_s0>;
> -};
> -
> -&cpu_l3 {
> -	cpu-supply = <&vdd_cpu_lit_s0>;
> -};
> -
> -&gpu {
> -	mali-supply = <&vdd_gpu_s0>;
> -	status = "okay";
> -};
> -
> -&hdmi0 {
> -	status = "okay";
> -};
> -
> -&hdmi0_in {
> -	hdmi0_in_vp0: endpoint {
> -		remote-endpoint = <&vp0_out_hdmi0>;
> -	};
> -};
> -
> -&hdmi0_out {
> -	hdmi0_out_con: endpoint {
> -		remote-endpoint = <&hdmi0_con_in>;
> -	};
> -};
> -
> -&hdmi0_sound {
> -	status = "okay";
> -};
> -
> -&hdmi1 {
> -	pinctrl-0 = <&hdmim0_tx1_cec &hdmim0_tx1_hpd
> -		     &hdmim1_tx1_scl &hdmim1_tx1_sda>;
> -	status = "okay";
> -};
> -
> -&hdmi1_in {
> -	hdmi1_in_vp1: endpoint {
> -		remote-endpoint = <&vp1_out_hdmi1>;
> -	};
> -};
> -
> -&hdmi1_out {
> -	hdmi1_out_con: endpoint {
> -		remote-endpoint = <&hdmi1_con_in>;
> -	};
> -};
> -
> -&hdmi1_sound {
> -	status = "okay";
> -};
> -
> -&hdmi_receiver_cma {
> -	status = "okay";
>  };
>  
>  &hdmi_receiver {
>  	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
> -	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
> -	pinctrl-names = "default";
> -	status = "okay";
> -};
> -
> -&hdptxphy0 {
> -	status = "okay";
> -};
> -
> -&hdptxphy1 {
> -	status = "okay";
> -};
> -
> -&i2c0 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2c0m2_xfer>;
> -	status = "okay";
> -
> -	vdd_cpu_big0_s0: regulator at 42 {
> -		compatible = "rockchip,rk8602";
> -		reg = <0x42>;
> -		fcs,suspend-voltage-selector = <1>;
> -		regulator-name = "vdd_cpu_big0_s0";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		regulator-min-microvolt = <550000>;
> -		regulator-max-microvolt = <1050000>;
> -		regulator-ramp-delay = <2300>;
> -		vin-supply = <&vcc5v0_sys>;
> -
> -		regulator-state-mem {
> -			regulator-off-in-suspend;
> -		};
> -	};
> -
> -	vdd_cpu_big1_s0: regulator at 43 {
> -		compatible = "rockchip,rk8603", "rockchip,rk8602";
> -		reg = <0x43>;
> -		fcs,suspend-voltage-selector = <1>;
> -		regulator-name = "vdd_cpu_big1_s0";
> -		regulator-always-on;
> -		regulator-boot-on;
> -		regulator-min-microvolt = <550000>;
> -		regulator-max-microvolt = <1050000>;
> -		regulator-ramp-delay = <2300>;
> -		vin-supply = <&vcc5v0_sys>;
> -
> -		regulator-state-mem {
> -			regulator-off-in-suspend;
> -		};
> -	};
> -};
> -
> -&i2c4 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2c4m1_xfer>;
> -	status = "okay";
> -
> -	usbc0: usb-typec at 22 {
> -		compatible = "fcs,fusb302";
> -		reg = <0x22>;
> -		interrupt-parent = <&gpio3>;
> -		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&usbc0_int>;
> -		vbus-supply = <&vbus5v0_typec>;
> -		/*
> -		 * When the board is starting to send power-delivery messages
> -		 * too late (5 seconds according to the specification), the
> -		 * power-supply reacts with a hard-reset. That removes the
> -		 * power from VBUS for some time, which resets te whole board.
> -		 */
> -		status = "fail";
> -
> -		usb_con: connector {
> -			compatible = "usb-c-connector";
> -			label = "USB-C";
> -			data-role = "dual";
> -			power-role = "sink";
> -			try-power-role = "sink";
> -			op-sink-microwatt = <1000000>;
> -			sink-pdos =
> -				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>,
> -				<PDO_VAR(5000, 20000, 5000)>;
> -
> -			ports {
> -				#address-cells = <1>;
> -				#size-cells = <0>;
> -
> -				port at 0 {
> -					reg = <0>;
> -					usbc0_role_sw: endpoint {
> -						remote-endpoint = <&dwc3_0_role_switch>;
> -					};
> -				};
> -
> -				port at 1 {
> -					reg = <1>;
> -					usbc0_orien_sw: endpoint {
> -						remote-endpoint = <&usbdp_phy0_orientation_switch>;
> -					};
> -				};
> -
> -				port at 2 {
> -					reg = <2>;
> -					dp_altmode_mux: endpoint {
> -						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
> -					};
> -				};
> -			};
> -		};
> -	};
> -};
> -
> -&i2c6 {
> -	status = "okay";
> -
> -	hym8563: rtc at 51 {
> -		compatible = "haoyu,hym8563";
> -		reg = <0x51>;
> -		#clock-cells = <0>;
> -		clock-output-names = "hym8563";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&hym8563_int>;
> -		interrupt-parent = <&gpio0>;
> -		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
> -		wakeup-source;
> -	};
> -};
> -
> -&i2c7 {
> -	status = "okay";
> -
> -	es8316: audio-codec at 11 {
> -		compatible = "everest,es8316";
> -		reg = <0x11>;
> -		clocks = <&cru I2S0_8CH_MCLKOUT>;
> -		clock-names = "mclk";
> -		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
> -		assigned-clock-rates = <12288000>;
> -		#sound-dai-cells = <0>;
> -
> -		port {
> -			es8316_p0_0: endpoint {
> -				remote-endpoint = <&i2s0_8ch_p0_0>;
> -			};
> -		};
> -	};
> -};
> -
> -&i2s0_8ch {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&i2s0_lrck
> -		     &i2s0_mclk
> -		     &i2s0_sclk
> -		     &i2s0_sdi0
> -		     &i2s0_sdo0>;
> -	status = "okay";
> -
> -	i2s0_8ch_p0: port {
> -		i2s0_8ch_p0_0: endpoint {
> -			dai-format = "i2s";
> -			mclk-fs = <256>;
> -			remote-endpoint = <&es8316_p0_0>;
> -		};
> -	};
> -};
> -
> -&i2s5_8ch {
> -	status = "okay";
> -};
> -
> -&i2s6_8ch {
> -	status = "okay";
> -};
> -
> -&package_thermal {
> -	polling-delay = <1000>;
> -
> -	trips {
> -		package_fan0: package-fan0 {
> -			temperature = <55000>;
> -			hysteresis = <2000>;
> -			type = "active";
> -		};
> -
> -		package_fan1: package-fan1 {
> -			temperature = <65000>;
> -			hysteresis = <2000>;
> -			type = "active";
> -		};
> -	};
> -
> -	cooling-maps {
> -		map0 {
> -			trip = <&package_fan0>;
> -			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
> -		};
> -
> -		map1 {
> -			trip = <&package_fan1>;
> -			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
> -		};
> -	};
> -};
> -
> -&pcie2x1l0 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pcie2_0_rst>;
> -	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
> -	vpcie3v3-supply = <&vcc3v3_pcie2x1l0>;
> -	status = "okay";
> -};
> -
> -&pcie2x1l2 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pcie2_2_rst>;
> -	reset-gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
> -	vpcie3v3-supply = <&vcc3v3_pcie2x1l2>;
> -	status = "okay";
> -};
> -
> -&pcie30phy {
>  	status = "okay";
>  };
>  
> -&pcie3x4 {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&pcie3_rst>;
> -	reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
> -	vpcie3v3-supply = <&vcc3v3_pcie30>;
> -	status = "okay";
> -};
> -
> -&pd_gpu {
> -	domain-supply = <&vdd_gpu_s0>;
> -};
> -
>  &pinctrl {
>  	hdmirx {
>  		hdmirx_hpd: hdmirx-5v-detection {
> @@ -524,559 +55,32 @@ hdmirx_hpd: hdmirx-5v-detection {
>  		};
>  	};
>  
> -	hym8563 {
> -		hym8563_int: hym8563-int {
> -			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -	};
> -
>  	leds {
>  		led_rgb_b: led-rgb-b {
>  			rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  	};
>  
> -	sound {
> -		hp_detect: hp-detect {
> -			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -	};
> -
>  	pcie2 {
> -		pcie2_0_rst: pcie2-0-rst {
> -			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -
>  		pcie2_0_vcc3v3_en: pcie2-0-vcc-en {
>  			rockchip,pins = <1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
> -
> -		pcie2_2_rst: pcie2-2-rst {
> -			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
>  	};
>  
> -	pcie3 {
> -		pcie3_rst: pcie3-rst {
> -			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -
> -		pcie3_vcc3v3_en: pcie3-vcc3v3-en {
> -			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -	};
> -
> -	usb {
> -		usbc0_int: usbc0-int {
> -			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -
> -		vbus5v0_typec_en: vbus5v0-typec-en {
> -			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
> -		};
> -	};
> -};
> -
> -&pwm1 {
> -	status = "okay";
> -};
> -
> -&saradc {
> -	vref-supply = <&avcc_1v8_s0>;
> -	status = "okay";
> -};
> -
> -&sdhci {
> -	bus-width = <8>;
> -	no-sdio;
> -	no-sd;
> -	non-removable;
> -	mmc-hs400-1_8v;
> -	mmc-hs400-enhanced-strobe;
> -	status = "okay";
> -};
> -
> -&sdmmc {
> -	max-frequency = <200000000>;
> -	no-sdio;
> -	no-mmc;
> -	bus-width = <4>;
> -	cap-mmc-highspeed;
> -	cap-sd-highspeed;
> -	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> -	disable-wp;
> -	sd-uhs-sdr104;
> -	vmmc-supply = <&vcc_3v3_s3>;
> -	vqmmc-supply = <&vccio_sd_s0>;
> -	status = "okay";
> -};
> -
> -&sfc {
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&fspim2_pins>;
> -	status = "okay";
> -
> -	flash at 0 {
> -		compatible = "jedec,spi-nor";
> -		reg = <0>;
> -		spi-max-frequency = <104000000>;
> -		spi-rx-bus-width = <4>;
> -		spi-tx-bus-width = <1>;
> -		vcc-supply = <&vcc_3v3_s3>;
> -	};
> -};
> -
> -&spi2 {
> -	status = "okay";
> -	assigned-clocks = <&cru CLK_SPI2>;
> -	assigned-clock-rates = <200000000>;
> -	pinctrl-names = "default";
> -	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
> -	num-cs = <1>;
> -
> -	pmic at 0 {
> -		compatible = "rockchip,rk806";
> -		spi-max-frequency = <1000000>;
> -		reg = <0x0>;
> -
> -		interrupt-parent = <&gpio0>;
> -		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
> -
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
> -			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
> -
> -		system-power-controller;
> -
> -		vcc1-supply = <&vcc5v0_sys>;
> -		vcc2-supply = <&vcc5v0_sys>;
> -		vcc3-supply = <&vcc5v0_sys>;
> -		vcc4-supply = <&vcc5v0_sys>;
> -		vcc5-supply = <&vcc5v0_sys>;
> -		vcc6-supply = <&vcc5v0_sys>;
> -		vcc7-supply = <&vcc5v0_sys>;
> -		vcc8-supply = <&vcc5v0_sys>;
> -		vcc9-supply = <&vcc5v0_sys>;
> -		vcc10-supply = <&vcc5v0_sys>;
> -		vcc11-supply = <&vcc_2v0_pldo_s3>;
> -		vcc12-supply = <&vcc5v0_sys>;
> -		vcc13-supply = <&vcc_1v1_nldo_s3>;
> -		vcc14-supply = <&vcc_1v1_nldo_s3>;
> -		vcca-supply = <&vcc5v0_sys>;
> -
> -		gpio-controller;
> -		#gpio-cells = <2>;
> -
> -		rk806_dvs1_null: dvs1-null-pins {
> -			pins = "gpio_pwrctrl1";
> -			function = "pin_fun0";
> -		};
> -
> -		rk806_dvs2_null: dvs2-null-pins {
> -			pins = "gpio_pwrctrl2";
> -			function = "pin_fun0";
> -		};
> -
> -		rk806_dvs3_null: dvs3-null-pins {
> -			pins = "gpio_pwrctrl3";
> -			function = "pin_fun0";
> -		};
> -
> -		regulators {
> -			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
> -				regulator-boot-on;
> -				regulator-min-microvolt = <550000>;
> -				regulator-max-microvolt = <950000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vdd_gpu_s0";
> -				regulator-enable-ramp-delay = <400>;
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <550000>;
> -				regulator-max-microvolt = <950000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vdd_cpu_lit_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vdd_log_s0: dcdc-reg3 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <675000>;
> -				regulator-max-microvolt = <750000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vdd_log_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -					regulator-suspend-microvolt = <750000>;
> -				};
> -			};
> -
> -			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <550000>;
> -				regulator-max-microvolt = <950000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vdd_vdenc_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vdd_ddr_s0: dcdc-reg5 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <675000>;
> -				regulator-max-microvolt = <900000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vdd_ddr_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -					regulator-suspend-microvolt = <850000>;
> -				};
> -			};
> -
> -			vdd2_ddr_s3: dcdc-reg6 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-name = "vdd2_ddr_s3";
> -
> -				regulator-state-mem {
> -					regulator-on-in-suspend;
> -				};
> -			};
> -
> -			vcc_2v0_pldo_s3: dcdc-reg7 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <2000000>;
> -				regulator-max-microvolt = <2000000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vdd_2v0_pldo_s3";
> -
> -				regulator-state-mem {
> -					regulator-on-in-suspend;
> -					regulator-suspend-microvolt = <2000000>;
> -				};
> -			};
> -
> -			vcc_3v3_s3: dcdc-reg8 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-name = "vcc_3v3_s3";
> -
> -				regulator-state-mem {
> -					regulator-on-in-suspend;
> -					regulator-suspend-microvolt = <3300000>;
> -				};
> -			};
> -
> -			vddq_ddr_s0: dcdc-reg9 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-name = "vddq_ddr_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vcc_1v8_s3: dcdc-reg10 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-name = "vcc_1v8_s3";
> -
> -				regulator-state-mem {
> -					regulator-on-in-suspend;
> -					regulator-suspend-microvolt = <1800000>;
> -				};
> -			};
> -
> -			avcc_1v8_s0: pldo-reg1 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-name = "avcc_1v8_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vcc_1v8_s0: pldo-reg2 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-name = "vcc_1v8_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -					regulator-suspend-microvolt = <1800000>;
> -				};
> -			};
> -
> -			avdd_1v2_s0: pldo-reg3 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <1200000>;
> -				regulator-max-microvolt = <1200000>;
> -				regulator-name = "avdd_1v2_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vcc_3v3_s0: pldo-reg4 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <3300000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vcc_3v3_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vccio_sd_s0: pldo-reg5 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <3300000>;
> -				regulator-ramp-delay = <12500>;
> -				regulator-name = "vccio_sd_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			pldo6_s3: pldo-reg6 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <1800000>;
> -				regulator-max-microvolt = <1800000>;
> -				regulator-name = "pldo6_s3";
> -
> -				regulator-state-mem {
> -					regulator-on-in-suspend;
> -					regulator-suspend-microvolt = <1800000>;
> -				};
> -			};
> -
> -			vdd_0v75_s3: nldo-reg1 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <750000>;
> -				regulator-max-microvolt = <750000>;
> -				regulator-name = "vdd_0v75_s3";
> -
> -				regulator-state-mem {
> -					regulator-on-in-suspend;
> -					regulator-suspend-microvolt = <750000>;
> -				};
> -			};
> -
> -			vdd_ddr_pll_s0: nldo-reg2 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <850000>;
> -				regulator-max-microvolt = <850000>;
> -				regulator-name = "vdd_ddr_pll_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -					regulator-suspend-microvolt = <850000>;
> -				};
> -			};
> -
> -			avdd_0v75_s0: nldo-reg3 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <750000>;
> -				regulator-max-microvolt = <750000>;
> -				regulator-name = "avdd_0v75_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vdd_0v85_s0: nldo-reg4 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <850000>;
> -				regulator-max-microvolt = <850000>;
> -				regulator-name = "vdd_0v85_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -
> -			vdd_0v75_s0: nldo-reg5 {
> -				regulator-always-on;
> -				regulator-boot-on;
> -				regulator-min-microvolt = <750000>;
> -				regulator-max-microvolt = <750000>;
> -				regulator-name = "vdd_0v75_s0";
> -
> -				regulator-state-mem {
> -					regulator-off-in-suspend;
> -				};
> -			};
> -		};
> -	};
> -};
> -
> -&tsadc {
> -	status = "okay";
> -};
> -
> -&uart2 {
> -	pinctrl-0 = <&uart2m0_xfer>;
> -	status = "okay";
> -};
> -
> -&u2phy0 {
> -	status = "okay";
> -};
> -
> -&u2phy0_otg {
> -	status = "okay";
> -};
> -
> -&u2phy1 {
> -	status = "okay";
> -};
> -
> -&u2phy1_otg {
> -	status = "okay";
> -};
> -
> -&u2phy2 {
> -	status = "okay";
> -};
> -
> -&u2phy2_host {
> -	/* connected to USB hub, which is powered by vcc5v0_sys */
> -	phy-supply = <&vcc5v0_sys>;
> -	status = "okay";
> -};
> -
> -&u2phy3 {
> -	status = "okay";
> -};
> -
> -&u2phy3_host {
> -	phy-supply = <&vcc5v0_host>;
> -	status = "okay";
> -};
> -
> -&usbdp_phy0 {
> -	mode-switch;
> -	orientation-switch;
> -	status = "okay";
> -
> -	port {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		usbdp_phy0_orientation_switch: endpoint at 0 {
> -			reg = <0>;
> -			remote-endpoint = <&usbc0_orien_sw>;
> -		};
> -
> -		usbdp_phy0_dp_altmode_mux: endpoint at 1 {
> -			reg = <1>;
> -			remote-endpoint = <&dp_altmode_mux>;
> -		};
> -	};
> -};
> -
> -&usbdp_phy1 {
> -	status = "okay";
> -};
> -
> -&usb_host0_ehci {
> -	status = "okay";
> -};
> -
> -&usb_host0_ohci {
> -	status = "okay";
> -};
> -
> -&usb_host0_xhci {
> -	usb-role-switch;
> -	status = "okay";
> -
> -	port {
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -
> -		dwc3_0_role_switch: endpoint {
> -			remote-endpoint = <&usbc0_role_sw>;
> +	sound {
> +		hp_detect: hp-detect {
> +			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
>  		};
>  	};
>  };
>  
> -&usb_host1_ehci {
> -	status = "okay";
> -};
> -
> -&usb_host1_ohci {
> -	status = "okay";
> -};
> -
> -&usb_host1_xhci {
> -	dr_mode = "host";
> -	status = "okay";
> -};
> -
>  &usb_host2_xhci {
>  	status = "okay";
>  };
>  
> -&vop {
> -	status = "okay";
> -};
> -
> -&vop_mmu {
> +&vcc3v3_pcie2x1l0 {
> +	gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pcie2_0_vcc3v3_en>;
>  	status = "okay";
>  };
> -
> -&vp0 {
> -	vp0_out_hdmi0: endpoint at ROCKCHIP_VOP2_EP_HDMI0 {
> -		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
> -		remote-endpoint = <&hdmi0_in_vp0>;
> -	};
> -};
> -
> -&vp1 {
> -	vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
> -		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
> -		remote-endpoint = <&hdmi1_in_vp1>;
> -	};
> -};
> 
> -- 
> 2.49.0
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20250509/7fcea063/attachment.sig>


More information about the linux-arm-kernel mailing list