[PATCH 5/8] PCI: rzg3s-host: Add Initial PCIe Host Driver for Renesas RZ/G3S SoC

[Philipp Zabel]

Hi Claudiu,

On Mi, 2025-04-30 at 13:32 +0300, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> 
> The Renesas RZ/G3S features a PCIe IP that complies with the PCI Express
> Base Specification 4.0 and supports speeds of up to 5 GT/s. It functions
> only as a root complex, with a single-lane (x1) configuration. The
> controller includes Type 1 configuration registers, as well as IP
> specific registers (called AXI registers) required for various adjustments.
> 
> Other Renesas RZ SoCs (e.g., RZ/G3E, RZ/V2H) share the same AXI registers
> but have both Root Complex and Endpoint capabilities. As a result, the PCIe
> host driver can be reused for these variants with minimal adjustments.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> ---
>  MAINTAINERS                              |    8 +
>  drivers/pci/controller/Kconfig           |    7 +
>  drivers/pci/controller/Makefile          |    1 +
>  drivers/pci/controller/pcie-rzg3s-host.c | 1561 ++++++++++++++++++++++
>  4 files changed, 1577 insertions(+)
>  create mode 100644 drivers/pci/controller/pcie-rzg3s-host.c
> 
[...]
> diff --git a/drivers/pci/controller/pcie-rzg3s-host.c b/drivers/pci/controller/pcie-rzg3s-host.c
> new file mode 100644
> index 000000000000..c3bce0acd57e
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-rzg3s-host.c
> @@ -0,0 +1,1561 @@
[...]
> +static int rzg3s_pcie_resets_bulk_set(int (*action)(int num, struct reset_control_bulk_data *rstcs),
> +				      struct reset_control **resets, u8 num_resets)
> +{
> +	struct reset_control_bulk_data *data __free(kfree) =
> +		kcalloc(num_resets, sizeof(*data), GFP_KERNEL);
> +
> +	if (!data)
> +		return -ENOMEM;
> +
> +	for (u8 i = 0; i < num_resets; i++)
> +		data[i].rstc = resets[i];
> +
> +	return action(num_resets, data);
> +}

What is the purpose of this? Can't you just store struct
reset_control_bulk_data in struct rzg3s_pcie_host and call
reset_control_bulk_assert/deassert() directly?

> +static int
> +rzg3s_pcie_resets_init(struct device *dev, struct reset_control ***resets,
> +		       struct reset_control *(*action)(struct device *dev, const char *id),
> +		       const char * const *reset_names, u8 num_resets)
> +{
> +	*resets = devm_kcalloc(dev, num_resets, sizeof(struct reset_control *), GFP_KERNEL);
> +	if (!*resets)
> +		return -ENOMEM;
> +
> +	for (u8 i = 0; i < num_resets; i++) {
> +		(*resets)[i] = action(dev, reset_names[i]);
> +		if (IS_ERR((*resets)[i]))
> +			return PTR_ERR((*resets)[i]);
> +	}
> +
> +	return 0;
> +}

Why not use devm_reset_control_bulk_get_exclusive() directly?


regards
Philipp