[PATCH v6 2/2] arm64: dts: rockchip: Enable SD-card interface on Radxa E20C

[Yao Zi]

SD-card is available on Radxa E20C board.

Signed-off-by: Yao Zi <ziyao at disroot.org>
---
 .../boot/dts/rockchip/rk3528-radxa-e20c.dts   | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
index 0942baba6b8f..d45b6594b2de 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3528-radxa-e20c.dts
@@ -18,6 +18,7 @@ / {
 
 	aliases {
 		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
 	};
 
 	chosen {
@@ -130,6 +131,18 @@ vcc5v0_sys: regulator-5v0-vcc-sys {
 		regulator-max-microvolt = <5000000>;
 	};
 
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vdd_arm: regulator-vdd-arm {
 		compatible = "pwm-regulator";
 		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
@@ -205,6 +218,12 @@ wan_led_g: wan-led-g {
 			rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm1 {
@@ -235,6 +254,17 @@ &sdhci {
 	status = "okay";
 };
 
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0m0_xfer>;
-- 
2.49.0