[PATCH 4/4] ARM: dts: qcom: msm8226-motorola-falcon: specify vddio_disp output voltage

[Konrad Dybcio]

On 5/8/25 4:11 PM, Stanislav Jakubek wrote:
> After some digging in downstream sources, it was found that the vddio_disp
> regulator's output voltage is 1.8V. This is further confirmed by the
> troubleshooting guide. Specify its output voltage as such.
> While at it, add a comment specifying the IC, which according to the
> schematic is the TI TPS22902.
> 
> Signed-off-by: Stanislav Jakubek <stano.jakubek at gmail.com>
> ---

Not sure what the troubleshooting guide you're referring to is, but
nonetheless

Reviewed-by: Konrad Dybcio <konrad.dybcio at oss.qualcomm.com>

Konrad