[PATCH] ARM: dts: bananapi: add support for PHY LEDs

[Chen-Yu Tsai]

On Wed, May 7, 2025 at 4:56 AM Michael Klein <michael at fossekall.de> wrote:
>
> The Bananapi M1 has three LEDs connected to the RTL8211E ethernet PHY.
> Add the corresponding nodes to the device tree.

I see from old emails that this was supposed to be updated? And if you
didn't, then his patch should be marked as a "RESEND", so tooling doesn't
get confused and ignore it.

I'll wait a couple days in case anyone else wants to take a look.

ChenYu

> Signed-off-by: Michael Klein <michael at fossekall.de>
> ---
>  .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
>
> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> index 46ecf9db2324..d8b362c9661a 100644
> --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
> @@ -48,6 +48,7 @@
>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
>
>  / {
>         model = "LeMaker Banana Pi";
> @@ -169,6 +170,32 @@ &ir0 {
>  &gmac_mdio {
>         phy1: ethernet-phy at 1 {
>                 reg = <1>;
> +
> +               leds {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       led at 0 {
> +                               reg = <0>;
> +                               color = <LED_COLOR_ID_GREEN>;
> +                               function = LED_FUNCTION_LAN;
> +                               linux,default-trigger = "netdev";
> +                       };
> +
> +                       led at 1 {
> +                               reg = <1>;
> +                               color = <LED_COLOR_ID_AMBER>;
> +                               function = LED_FUNCTION_LAN;
> +                               linux,default-trigger = "netdev";
> +                       };
> +
> +                       led at 2 {
> +                               reg = <2>;
> +                               color = <LED_COLOR_ID_BLUE>;
> +                               function = LED_FUNCTION_LAN;
> +                               linux,default-trigger = "netdev";
> +                       };
> +               };
>         };
>  };
>
> --
> 2.39.5
>
>