[PATCH v5 4/4] ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board

[Andrew Lunn]

> > > +	phy-handle = <&phy1>;
> > > +
> > > +	mdio {
> > > +		#address-cells = <1>;
> > > +		#size-cells = <0>;
> > > +		compatible = "snps,dwmac-mdio";
> > > +		phy1: ethernet-phy at 1 {
> > > +			reg = <1>;
> > > +			interrupt-parent = <&gpiod>;
> > > +			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
> > 
> > PHY interrupts are 99% time level, not edge.
> 
> That is correct, but I am facing strange behavior, when I set
> IRQ_TYPE_LEVEL_LOW.
> My board stops booting at:
> 
> [    2.343233] Waiting for root device /dev/mmcblk0p4...
> [   12.638818] platform 5a006000.usbphyc: deferred probe pending
> [   12.643192] platform 49000000.usb-otg: deferred probe pending
> [   12.649029] platform 48003000.adc: deferred probe pending
> [   12.654277] platform 5800d000.usb: deferred probe pending
> [   12.659744] platform 5800c000.usb: deferred probe pending
> [   12.665089] amba 58005000.mmc: deferred probe pending
> [   12.670239] amba 58007000.mmc: deferred probe pending
> [   12.675185] platform 50025000.vrefbuf: deferred probe pending
> 
> I must investigate this. If You have any idea, You are welcome to share it.

Could be an interrupt storm. The interrupt is not getting cleared
because of something missing in the PHY driver, so it just fires again
and again.

	Andrew