[PATCH 4/4] arm64: dts: ti: k3-am62a7-*: Specify Temperature Grade

[Daniel Schultz]

Specify the temperature grade in the base device tree to ensure
correct trip points are applied for each board.

Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
---
 arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts | 1 +
 arch/arm64/boot/dts/ti/k3-am62a7-sk.dts                | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts
index 77e5fef618ba..7d2e4694ed8e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-phyboard-lyra-rdk.dts
@@ -10,6 +10,7 @@
 #include "k3-am62a7.dtsi"
 #include "k3-am62a-phycore-som.dtsi"
 #include "k3-am62x-phyboard-lyra.dtsi"
+#include "k3-am62a-thermal-industrial.dtsi"
 
 / {
 	compatible = "phytec,am62a7-phyboard-lyra-rdk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index 1c9d95696c83..125e812fbb86 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -11,6 +11,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
 #include "k3-am62a7.dtsi"
+#include "k3-am62a-thermal-automative.dtsi"
 
 / {
 	compatible = "ti,am62a7-sk", "ti,am62a7";
-- 
2.25.1