[PATCH v8 5/9] mfd: bcm590xx: Add PMU ID/revision parsing function

[Stanislav Jakubek]

On Tue, May 06, 2025 at 09:03:15PM +0200, Artur Weber wrote:
> On 5/6/25 18:11, Stanislav Jakubek wrote:
> > Hi Artur,
> > one note below.
> > 
> > On Wed, Apr 30, 2025 at 09:07:09AM +0200, Artur Weber wrote:
> > > The BCM590xx PMUs have two I2C registers for reading the PMU ID
> > > and revision. The revision is useful for subdevice drivers, since
> > > different revisions may have slight differences in behavior (for
> > > example - BCM59054 has different regulator configurations for
> > > revision A0 and A1).
> > > 
> > > Check the PMU ID register and make sure it matches the DT compatible.
> > > Fetch the digital and analog revision from the PMUREV register
> > > so that it can be used in subdevice drivers.
> > > 
> > > Also add some known revision values to bcm590xx.h, for convenience
> > > when writing subdevice drivers.
> > > 
> > > Signed-off-by: Artur Weber <aweber.kernel at gmail.com>
> > > ---
> > 
> > [snip]
> > 
> > > diff --git a/include/linux/mfd/bcm590xx.h b/include/linux/mfd/bcm590xx.h
> > > index 8d146e3b102a7dbce6f4dbab9f8ae5a9c4e68c0e..fbc458e94bef923ca1b69afe2cac944adf6fedf8 100644
> > > --- a/include/linux/mfd/bcm590xx.h
> > > +++ b/include/linux/mfd/bcm590xx.h
> > > @@ -17,6 +17,16 @@
> > >   #define BCM590XX_PMUID_BCM59054		0x54
> > >   #define BCM590XX_PMUID_BCM59056		0x56
> > > +/* Known chip revision IDs */
> > > +#define BCM59054_REV_DIGITAL_A1		1
> > 
> > 1 seems to be the digital revision ID for A0 (couldn't find the analog
> > revision ID), see [1].
> > 
> > Other values seems to match downstream (as far as I can tell anyway).
> > 
> > [1] https://github.com/Samsung-KYLEPROXX/android_kernel_samsung_kyleproxx/blob/cm-13.0/include/linux/mfd/bcmpmu59xxx.h#L82
> From my testing on a device with the BCM59054A1 (BCM23550-based Samsung
> Galaxy Grand Neo), the digital value is also 1 on this model:
> 
>   bcm590xx 0-0008: PMU ID 0x54 (BCM59054), revision: dig 1 ana 2
> 
> (This constant is not actually used anywhere in code yet - I just
> included it for the sake of completeness, since the BCM59056 headers
> in downstream listed both values...)
> 
> Best regards
> Artur

Thanks for checking Artur!

I guess both BCM59054 A0 and A1 have the same digital revision?
Well, to be sure we'd have to get the hardware, since downstream doesn't
use this value either.
So I guess the patch is good as-is, we can add known IDs when we... know them ;)

Regards,
Stanislav