[PATCH] arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-rock3c

[Peter Robinson]

As described in the radxa_rock_3c_v1400_schematic.pdf, the SPI Flash's
VCC connector is connected to VCCIO_FLASH and according to the
that same schematic, that belongs to the VCC_1V8 power source.

This fixes the following warning:

  spi-nor spi4.0: supply vcc not found, using dummy regulator

Fixes: ee219017ddb5 ("arm64: dts: rockchip: Add Radxa ROCK 3C")
Signed-off-by: Peter Robinson <pbrobinson at gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
index 53e71528e4c4c..6224d72813e59 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-rock-3c.dts
@@ -636,6 +636,7 @@ flash at 0 {
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
-- 
2.49.0