[PATCH v2 1/4] arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors

[Wadim Egorov]

Am 06.05.25 um 16:36 schrieb Daniel Schultz:
> For every remote processor, set up dedicated memory regions and
> associate the required mailbox channels. Allocate two memory areas
> per remote core: one 1MB region for vring shared buffers, and
> another for external memory used by the remote processor for its
> resource table and trace buffer.
> 
> Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
Reviewed-by: Wadim Egorov <w.egorov at phytec.de>

> ---
>   .../boot/dts/ti/k3-am62-phycore-som.dtsi      | 35 +++++++++++++++----
>   1 file changed, 29 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> index 55ed418c023b..3075979935d5 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> @@ -64,6 +64,18 @@ mcu_m4fss_memory_region: m4f-memory at 9cc00000 {
>   			no-map;
>   		};
>   
> +		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9da00000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0x9da00000 0x00 0x100000>;
> +			no-map;
> +		};
> +
> +		wkup_r5fss0_core0_memory_region: r5f-memory at 9db00000 {
> +			compatible = "shared-dma-pool";
> +			reg = <0x00 0x9db00000 0x00 0xc00000>;
> +			no-map;
> +		};
> +
>   		secure_tfa_ddr: tfa at 9e780000 {
>   			reg = <0x00 0x9e780000 0x00 0x80000>;
>   			alignment = <0x1000>;
> @@ -75,12 +87,6 @@ secure_ddr: optee at 9e800000 {
>   			alignment = <0x1000>;
>   			no-map;
>   		};
> -
> -		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9db00000 {
> -			compatible = "shared-dma-pool";
> -			reg = <0x00 0x9db00000 0x00 0x00c00000>;
> -			no-map;
> -		};
>   	};
>   
>   	vcc_5v0_som: regulator-vcc-5v0-som {
> @@ -240,10 +246,17 @@ cpsw3g_phy1: ethernet-phy at 1 {
>   };
>   
>   &mailbox0_cluster0 {
> +	status = "okay";
> +
>   	mbox_m4_0: mbox-m4-0 {
>   		ti,mbox-rx = <0 0 0>;
>   		ti,mbox-tx = <1 0 0>;
>   	};
> +
> +	mbox_r5_0: mbox-r5-0 {
> +		ti,mbox-rx = <2 0 0>;
> +		ti,mbox-tx = <3 0 0>;
> +	};
>   };
>   
>   &main_pktdma {
> @@ -386,3 +399,13 @@ &sdhci0 {
>   	bootph-all;
>   	status = "okay";
>   };
> +
> +&wkup_r5fss0 {
> +	status = "okay";
> +};
> +
> +&wkup_r5fss0_core0 {
> +	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
> +	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
> +			<&wkup_r5fss0_core0_memory_region>;
> +};