[PATCH 1/4] arm64: dts: ti: k3-am62-phycore-som: Enable Co-processors
Daniel Schultz
d.schultz at phytec.de
Tue May 6 04:54:59 PDT 2025
For every remote processor, set up dedicated memory regions and
associate the required mailbox channels. Allocate two memory areas
per remote core: one 1MB region for vring shared buffers, and
another for external memory used by the remote processor for its
resource table and trace buffer.
Signed-off-by: Daniel Schultz <d.schultz at phytec.de>
---
.../boot/dts/ti/k3-am62-phycore-som.dtsi | 35 +++++++++++++++----
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 2ef4cbaec789..71d165a7abe0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -57,6 +57,18 @@ mcu_m4fss_memory_region: m4f-memory at 9cc00000 {
no-map;
};
+ wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9da00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9da00000 0x00 0x100000>;
+ no-map;
+ };
+
+ wkup_r5fss0_core0_memory_region: r5f-memory at 9db00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x00 0x9db00000 0x00 0xc00000>;
+ no-map;
+ };
+
secure_tfa_ddr: tfa at 9e780000 {
reg = <0x00 0x9e780000 0x00 0x80000>;
alignment = <0x1000>;
@@ -68,12 +80,6 @@ secure_ddr: optee at 9e800000 {
alignment = <0x1000>;
no-map;
};
-
- wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory at 9db00000 {
- compatible = "shared-dma-pool";
- reg = <0x00 0x9db00000 0x00 0x00c00000>;
- no-map;
- };
};
vcc_5v0_som: regulator-vcc-5v0-som {
@@ -226,10 +232,17 @@ cpsw3g_phy1: ethernet-phy at 1 {
};
&mailbox0_cluster0 {
+ status = "okay";
+
mbox_m4_0: mbox-m4-0 {
ti,mbox-rx = <0 0 0>;
ti,mbox-tx = <1 0 0>;
};
+
+ mbox_r5_0: mbox-r5-0 {
+ ti,mbox-rx = <2 0 0>;
+ ti,mbox-tx = <3 0 0>;
+ };
};
&main_i2c0 {
@@ -365,3 +378,13 @@ &sdhci0 {
non-removable;
status = "okay";
};
+
+&wkup_r5fss0 {
+ status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+ mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+ memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+ <&wkup_r5fss0_core0_memory_region>;
+};
--
2.25.1
More information about the linux-arm-kernel
mailing list