[PATCH 03/12] gpio: lpc18xx: use new GPIO line value setter callbacks

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
 drivers/gpio/gpio-lpc18xx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-lpc18xx.c b/drivers/gpio/gpio-lpc18xx.c
index 2cf9fb4637a2b..8bb8a87ec1e99 100644
--- a/drivers/gpio/gpio-lpc18xx.c
+++ b/drivers/gpio/gpio-lpc18xx.c
@@ -263,10 +263,14 @@ static int lpc18xx_gpio_pin_ic_probe(struct lpc18xx_gpio_chip *gc)
 	return ret;
 }
 
-static void lpc18xx_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+static int lpc18xx_gpio_set(struct gpio_chip *chip, unsigned int offset,
+			    int value)
 {
 	struct lpc18xx_gpio_chip *gc = gpiochip_get_data(chip);
+
 	writeb(value ? 1 : 0, gc->base + offset);
+
+	return 0;
 }
 
 static int lpc18xx_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -316,7 +320,7 @@ static const struct gpio_chip lpc18xx_chip = {
 	.free			= gpiochip_generic_free,
 	.direction_input	= lpc18xx_gpio_direction_input,
 	.direction_output	= lpc18xx_gpio_direction_output,
-	.set			= lpc18xx_gpio_set,
+	.set_rv			= lpc18xx_gpio_set,
 	.get			= lpc18xx_gpio_get,
 	.ngpio			= LPC18XX_MAX_PORTS * LPC18XX_PINS_PER_PORT,
 	.owner			= THIS_MODULE,

-- 
2.45.2