[PATCH] arm64: dts: allwinner: a100: set maximum MMC frequency

[Andre Przywara]

The manual for the Allwinner A133 SoC mentions that the maximum
supported MMC frequency is 150 MHz, for all of the MMC devices.

Describe that in the DT entry, to help drivers setting the right
interface frequency.

Fixes: fcfbb8d9ec58 ("arm64: allwinner: a100: Add MMC related nodes")
Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
Hi,

the Linux and FreeBSD kernels limit the MMC bus frequency to 52 MHz,
unless explicitly told otherwise via this property. So this patch
increases the performance of HS-200 eMMC from ~44 MB/s to 129 MB/s.

Cheers,
Andre

 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 597c2b82693b0..ecc04be243c01 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -267,6 +267,7 @@ mmc0: mmc at 4020000 {
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -282,6 +283,7 @@ mmc1: mmc at 4021000 {
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc1_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -297,6 +299,7 @@ mmc2: mmc at 4022000 {
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc2_pins>;
+			max-frequency = <150000000>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.46.3