[PATCH v5 4/4] ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board

[Andrew Lunn]

> +&ethernet0 {
> +	status = "okay";
> +	pinctrl-0 = <&ethernet0_ux_rgmii_pins_a>;
> +	pinctrl-1 = <&ethernet0_ux_rgmii_pins_sleep_a>;
> +	pinctrl-names = "default", "sleep";
> +	phy-mode = "rgmii-id";
> +	max-speed = <1000>;

max-speed is probably pointless, rgmii cannot do more than 1G.

> +	phy-handle = <&phy1>;
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +		phy1: ethernet-phy at 1 {
> +			reg = <1>;
> +			interrupt-parent = <&gpiod>;
> +			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;

PHY interrupts are 99% time level, not edge.

	Andrew