[RFC 1/7] firmware: arm_scmi: move boiler plate code into the get info functions
Dan Carpenter
dan.carpenter at linaro.org
Mon May 5 04:37:22 PDT 2025
This code to check whether the selector is valid and if the item has
already been recorded in the array can be moved to the
scmi_pinctrl_get_function_info() type functions. That way it's in
one place instead of duplicated in each of the callers.
I removed the check for if "pi->nr_groups == 0" because if that were the
case then "selector >= pi->nr_groups" would already be true. It already
was not checked for pins so this makes things a bit more uniform.
I also removed the check for if (!pin) since pin is an offset into the
middle of an array and can't be NULL.
Signed-off-by: Dan Carpenter <dan.carpenter at linaro.org>
---
drivers/firmware/arm_scmi/pinctrl.c | 108 +++++++++++++---------------
1 file changed, 48 insertions(+), 60 deletions(-)
diff --git a/drivers/firmware/arm_scmi/pinctrl.c b/drivers/firmware/arm_scmi/pinctrl.c
index 3855c98caf06..d18c2d248f04 100644
--- a/drivers/firmware/arm_scmi/pinctrl.c
+++ b/drivers/firmware/arm_scmi/pinctrl.c
@@ -596,11 +596,19 @@ static int scmi_pinctrl_pin_free(const struct scmi_protocol_handle *ph, u32 pin)
}
static int scmi_pinctrl_get_group_info(const struct scmi_protocol_handle *ph,
- u32 selector,
- struct scmi_group_info *group)
+ u32 selector)
{
+ struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ struct scmi_group_info *group;
int ret;
+ if (selector >= pi->nr_groups)
+ return -EINVAL;
+
+ group = &pi->groups[selector];
+ if (group->present)
+ return 0;
+
ret = scmi_pinctrl_attributes(ph, GROUP_TYPE, selector, group->name,
&group->nr_pins);
if (ret)
@@ -632,21 +640,14 @@ static int scmi_pinctrl_get_group_name(const struct scmi_protocol_handle *ph,
u32 selector, const char **name)
{
struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ int ret;
if (!name)
return -EINVAL;
- if (selector >= pi->nr_groups || pi->nr_groups == 0)
- return -EINVAL;
-
- if (!pi->groups[selector].present) {
- int ret;
-
- ret = scmi_pinctrl_get_group_info(ph, selector,
- &pi->groups[selector]);
- if (ret)
- return ret;
- }
+ ret = scmi_pinctrl_get_group_info(ph, selector);
+ if (ret)
+ return ret;
*name = pi->groups[selector].name;
@@ -658,21 +659,14 @@ static int scmi_pinctrl_group_pins_get(const struct scmi_protocol_handle *ph,
u32 *nr_pins)
{
struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ int ret;
if (!pins || !nr_pins)
return -EINVAL;
- if (selector >= pi->nr_groups || pi->nr_groups == 0)
- return -EINVAL;
-
- if (!pi->groups[selector].present) {
- int ret;
-
- ret = scmi_pinctrl_get_group_info(ph, selector,
- &pi->groups[selector]);
- if (ret)
- return ret;
- }
+ ret = scmi_pinctrl_get_group_info(ph, selector);
+ if (ret)
+ return ret;
*pins = pi->groups[selector].group_pins;
*nr_pins = pi->groups[selector].nr_pins;
@@ -681,11 +675,19 @@ static int scmi_pinctrl_group_pins_get(const struct scmi_protocol_handle *ph,
}
static int scmi_pinctrl_get_function_info(const struct scmi_protocol_handle *ph,
- u32 selector,
- struct scmi_function_info *func)
+ u32 selector)
{
+ struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ struct scmi_function_info *func;
int ret;
+ if (selector >= pi->nr_functions)
+ return -EINVAL;
+
+ func = &pi->functions[selector];
+ if (func->present)
+ return 0;
+
ret = scmi_pinctrl_attributes(ph, FUNCTION_TYPE, selector, func->name,
&func->nr_groups);
if (ret)
@@ -716,21 +718,14 @@ static int scmi_pinctrl_get_function_name(const struct scmi_protocol_handle *ph,
u32 selector, const char **name)
{
struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ int ret;
if (!name)
return -EINVAL;
- if (selector >= pi->nr_functions || pi->nr_functions == 0)
- return -EINVAL;
-
- if (!pi->functions[selector].present) {
- int ret;
-
- ret = scmi_pinctrl_get_function_info(ph, selector,
- &pi->functions[selector]);
- if (ret)
- return ret;
- }
+ ret = scmi_pinctrl_get_function_info(ph, selector);
+ if (ret)
+ return ret;
*name = pi->functions[selector].name;
return 0;
@@ -742,21 +737,14 @@ scmi_pinctrl_function_groups_get(const struct scmi_protocol_handle *ph,
const u32 **groups)
{
struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ int ret;
if (!groups || !nr_groups)
return -EINVAL;
- if (selector >= pi->nr_functions || pi->nr_functions == 0)
- return -EINVAL;
-
- if (!pi->functions[selector].present) {
- int ret;
-
- ret = scmi_pinctrl_get_function_info(ph, selector,
- &pi->functions[selector]);
- if (ret)
- return ret;
- }
+ ret = scmi_pinctrl_get_function_info(ph, selector);
+ if (ret)
+ return ret;
*groups = pi->functions[selector].groups;
*nr_groups = pi->functions[selector].nr_groups;
@@ -771,13 +759,19 @@ static int scmi_pinctrl_mux_set(const struct scmi_protocol_handle *ph,
}
static int scmi_pinctrl_get_pin_info(const struct scmi_protocol_handle *ph,
- u32 selector, struct scmi_pin_info *pin)
+ u32 selector)
{
+ struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ struct scmi_pin_info *pin;
int ret;
- if (!pin)
+ if (selector >= pi->nr_pins)
return -EINVAL;
+ pin = &pi->pins[selector];
+ if (pin->present)
+ return 0;
+
ret = scmi_pinctrl_attributes(ph, PIN_TYPE, selector, pin->name, NULL);
if (ret)
return ret;
@@ -790,20 +784,14 @@ static int scmi_pinctrl_get_pin_name(const struct scmi_protocol_handle *ph,
u32 selector, const char **name)
{
struct scmi_pinctrl_info *pi = ph->get_priv(ph);
+ int ret;
if (!name)
return -EINVAL;
- if (selector >= pi->nr_pins)
- return -EINVAL;
-
- if (!pi->pins[selector].present) {
- int ret;
-
- ret = scmi_pinctrl_get_pin_info(ph, selector, &pi->pins[selector]);
- if (ret)
- return ret;
- }
+ ret = scmi_pinctrl_get_pin_info(ph, selector);
+ if (ret)
+ return ret;
*name = pi->pins[selector].name;
--
2.47.2
More information about the linux-arm-kernel
mailing list