[PATCH v2] arm64: dts: imx8mp-var-som: Fix LDO5 shutdown causing SD card timeout

[Tarang Raval]

Hi Himanshu,

> Fix SD card timeout issue caused by LDO5 regulator getting disabled
> after boot.
>
> The kernel log shows LDO5 being disabled, which leads to a timeout
> on USDHC2:
> [   33.760561] LDO5: disabling
> [   81.119861] mmc1: Timeout waiting for hardware interrupt.
>
> To prevent this, set regulator-boot-on and regulator-always-on for
> LDO5. Also add the vqmmc regulator to properly support 1.8V/3.3V
> signaling for USDHC2 using a GPIO-controlled regulator.
>
> Fixes: 6c2a1f4f71258 ("arm64: dts: imx8mp-var-som-symphony: Add Variscite 
> Symphony board and VAR-SOM-MX8MP SoM")
> Signed-off-by: Himanshu Bhavani <himanshu.bhavani at siliconsignals.io>

Acked-by: Tarang Raval <tarang.raval at siliconsignals.io>

Best Regards,
Tarang 

> ---
>  arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
> index b2ac2583a592..b59da91fdd04 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-var-som.dtsi
> @@ -35,7 +35,6 @@ memory at 40000000 {
>                        <0x1 0x00000000 0 0xc0000000>;
>          };
>  
> -
>          reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
>                  compatible = "regulator-fixed";
>                  regulator-name = "VSD_3V3";
> @@ -46,6 +45,16 @@ reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
>                  startup-delay-us = <100>;
>                  off-on-delay-us = <12000>;
>          };
> +
> +       reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
> +               compatible = "regulator-gpio";
> +               regulator-name = "VSD_VSEL";
> +               regulator-min-microvolt = <1800000>;
> +               regulator-max-microvolt = <3300000>;
> +               gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
> +               states = <3300000 0x0 1800000 0x1>;
> +               vin-supply = <&ldo5>;
> +       };
>  };
>  
>  &A53_0 {
> @@ -205,6 +214,7 @@ &usdhc2 {
>          pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
>          cd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
>          vmmc-supply = <&reg_usdhc2_vmmc>;
> +       vqmmc-supply = <&reg_usdhc2_vqmmc>;
>          bus-width = <4>;
>          status = "okay";
>  };
> --
> 2.34.1