[PATCH v2 2/3] arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs

[Andrew Davis]

On 5/2/25 10:39 AM, Paresh Bhagat wrote:
> Update k3-pinctrl file to include pin definitions for AM62D2 family of
> SoCs.
> 
> Signed-off-by: Paresh Bhagat <p-bhagat at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-pinctrl.h | 3 +++
>   1 file changed, 3 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> index cac7cccc1112..0cf57179c974 100644
> --- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
> +++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
> @@ -63,6 +63,9 @@
>   #define AM62AX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
>   #define AM62AX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
>   
> +#define AM62DX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
> +#define AM62DX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
> +

Your board DTS file is including k3-am62a.dtsi, so you are using the AM62A pinmux
controller and should use its macros (AM62AX_*).

Andrew

>   #define AM62PX_IOPAD(pa, val, muxmode)		(((pa) & 0x1fff)) ((val) | (muxmode))
>   #define AM62PX_MCU_IOPAD(pa, val, muxmode)	(((pa) & 0x1fff)) ((val) | (muxmode))
>