[PATCH v2 1/3] dt-bindings: arm: ti: Add bindings for AM62D2 SoC

[Nishanth Menon]

On 21:09-20250502, Paresh Bhagat wrote:
> The AM62D2 SoC belongs to the K3 Multicore SoC architecture with DSP core
> targeted for applications needing high-performance Digital Signal
> Processing. It is used in applications like automotive audio systems,
> professional sound equipment, radar and radio for aerospace, sonar in
> marine devices, and ultrasound in medical imaging. It also supports
> precise signal analysis in test and measurement tools.
> 
> Some highlights of AM62D2 SoC are:
> 
> * Quad-Cortex-A53s (running up to 1.4GHz) in a single cluster. Dual/Single
>   core variants are provided in the same package to allow HW compatible
>   designs.
> * One Device manager Cortex-R5F for system power and resource management,
>   and one Cortex-R5F for Functional Safety or general-purpose usage.
> * DSP with Matrix Multiplication Accelerator(MMA) (up to 2 TOPS) based on
>   single core C7x.
> * 3x Multichannel Audio Serial Ports (McASP) Up to 4/6/16 Serial Data Pins
>   which can Transmit and Receive Clocks up to 50MHz, with multi-channel I2S
>   and TDM Audio inputs and outputs.
> * Integrated Giga-bit Ethernet switch supporting up to a total of two
>   external ports with TSN capable to enable audio networking features such
>   as, Ethernet Audio Video Bridging (eAVB) and Dante.
> * 9xUARTs, 5xSPI, 6xI2C, 2xUSB2, 3xCAN-FD, 3x eMMC and SD, OSPI memory
>   controller, 1x CSI-RX-4L for Camera, eCAP/eQEP, ePWM, among other
>   peripherals.
> * Dedicated Centralized Hardware Security Module with support for secure
>   boot, debug security and crypto acceleration and trusted execution
>   environment.
> * One 32 bit DDR Subsystem that supports LPDDR4, DDR4 memory types.
> * Low power mode support: Partial IO support for CAN/GPIO/UART wakeup.
> 
> This adds dt bindings for TI's AM62D2 family of devices.
> 
> More details about the SoCs can be found in the Technical Reference Manual:
> https://www.ti.com/lit/pdf/sprujd4
> 
> Signed-off-by: Paresh Bhagat <p-bhagat at ti.com>

Looking at the board patch in the series, this is am62p5 ? what is the
difference? If there is a difference, why is there no dtsi
file for am62d?

> ---
>  Documentation/devicetree/bindings/arm/ti/k3.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/ti/k3.yaml b/Documentation/devicetree/bindings/arm/ti/k3.yaml
> index a6d9fd0bcaba..bac821d63cf1 100644
> --- a/Documentation/devicetree/bindings/arm/ti/k3.yaml
> +++ b/Documentation/devicetree/bindings/arm/ti/k3.yaml
> @@ -31,6 +31,12 @@ properties:
>            - const: phytec,am62a-phycore-som
>            - const: ti,am62a7
>  
> +      - description: K3 AM62D2 SoC and Boards
> +        items:
> +          - enum:
> +              - ti,am62d2-evm
> +          - const: ti,am62d2
> +
>        - description: K3 AM62P5 SoC and Boards
>          items:
>            - enum:
> -- 
> 2.34.1
> 

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D