[PATCH v2 8/9] coresight: Make clock sequence consistent

[Anshuman Khandual]

On 4/23/25 20:47, Leo Yan wrote:
> Since atclk is enabled after pclk during the probe phase, this commit
> maintains the same sequence for the runtime resume flow.

which is also the exact opposite of the suspend flow as expected.

> 
> Signed-off-by: Leo Yan <leo.yan at arm.com>
> ---
>  drivers/hwtracing/coresight/coresight-funnel.c     | 6 +++---
>  drivers/hwtracing/coresight/coresight-replicator.c | 6 +++---
>  drivers/hwtracing/coresight/coresight-stm.c        | 6 +++---
>  drivers/hwtracing/coresight/coresight-tpiu.c       | 6 +++---
>  4 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c
> index 173fee3aaa6e..62e5125c37ad 100644
> --- a/drivers/hwtracing/coresight/coresight-funnel.c
> +++ b/drivers/hwtracing/coresight/coresight-funnel.c
> @@ -296,11 +296,11 @@ static int funnel_runtime_resume(struct device *dev)
>  {
>  	struct funnel_drvdata *drvdata = dev_get_drvdata(dev);
>  
> -	if (drvdata && !IS_ERR(drvdata->atclk))
> -		clk_prepare_enable(drvdata->atclk);
> -
>  	if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk))
>  		clk_prepare_enable(drvdata->pclk);
> +
> +	if (drvdata && !IS_ERR(drvdata->atclk))
> +		clk_prepare_enable(drvdata->atclk);
>  	return 0;
>  }
>  #endif
> diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c
> index 7250a2174145..56b03e6d8336 100644
> --- a/drivers/hwtracing/coresight/coresight-replicator.c
> +++ b/drivers/hwtracing/coresight/coresight-replicator.c
> @@ -334,11 +334,11 @@ static int replicator_runtime_resume(struct device *dev)
>  {
>  	struct replicator_drvdata *drvdata = dev_get_drvdata(dev);
>  
> -	if (drvdata && !IS_ERR(drvdata->atclk))
> -		clk_prepare_enable(drvdata->atclk);
> -
>  	if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk))
>  		clk_prepare_enable(drvdata->pclk);
> +
> +	if (drvdata && !IS_ERR(drvdata->atclk))
> +		clk_prepare_enable(drvdata->atclk);
>  	return 0;
>  }
>  #endif
> diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
> index 89e90e7f54de..f17986edac00 100644
> --- a/drivers/hwtracing/coresight/coresight-stm.c
> +++ b/drivers/hwtracing/coresight/coresight-stm.c
> @@ -969,11 +969,11 @@ static int stm_runtime_resume(struct device *dev)
>  {
>  	struct stm_drvdata *drvdata = dev_get_drvdata(dev);
>  
> -	if (drvdata && !IS_ERR(drvdata->atclk))
> -		clk_prepare_enable(drvdata->atclk);
> -
>  	if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk))
>  		clk_prepare_enable(drvdata->pclk);
> +
> +	if (drvdata && !IS_ERR(drvdata->atclk))
> +		clk_prepare_enable(drvdata->atclk);
>  	return 0;
>  }
>  #endif
> diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c
> index b3d0db0e53b9..4701b34778bd 100644
> --- a/drivers/hwtracing/coresight/coresight-tpiu.c
> +++ b/drivers/hwtracing/coresight/coresight-tpiu.c
> @@ -218,11 +218,11 @@ static int tpiu_runtime_resume(struct device *dev)
>  {
>  	struct tpiu_drvdata *drvdata = dev_get_drvdata(dev);
>  
> -	if (drvdata && !IS_ERR(drvdata->atclk))
> -		clk_prepare_enable(drvdata->atclk);
> -
>  	if (drvdata && !IS_ERR_OR_NULL(drvdata->pclk))
>  		clk_prepare_enable(drvdata->pclk);
> +
> +	if (drvdata && !IS_ERR(drvdata->atclk))
> +		clk_prepare_enable(drvdata->atclk);
>  	return 0;
>  }
>  #endif

These also matches the clock initialization sequence during probe()
via the new helper coresight_get_enable_clocks().

LGTM.

Reviewed-by: Anshuman Khandual <anshuman.khandual at arm.com>