[PATCH 6/8] arm64: dts: imx8mm-evk: add pcie0-ep node and apply pcie0-ep overlay file

[Frank Li]

Add pcie0-ep node information and apply pcie0-ep overlay file.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  5 +++++
 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 13 +++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 7778a0b3abe37..4f2f50203dd86 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -116,6 +116,11 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emtop-baseboard.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
+
+imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
+imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 5f8336217bb88..622caaa78eaf1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -544,6 +544,19 @@ &pcie0 {
 	status = "okay";
 };
 
+&pcie0_ep {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie0>;
+	clocks = <&clk IMX8MM_CLK_PCIE1_ROOT>, <&pcie0_refclk>,
+		 <&clk IMX8MM_CLK_PCIE1_AUX>;
+	assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
+			  <&clk IMX8MM_CLK_PCIE1_CTRL>;
+	assigned-clock-rates = <10000000>, <250000000>;
+	assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
+				 <&clk IMX8MM_SYS_PLL2_250M>;
+	status = "disabled";
+};
+
 &sai2 {
 	#sound-dai-cells = <0>;
 	pinctrl-names = "default";

-- 
2.34.1