[PATCH 3/8] arm64: dts: imx8dxl-evk: Add pcie0-ep node and use unified pcie0 label

[Frank Li]

Use unified pcie0 label and add pcie0-ep node.

Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index 5f3b4014e1521..b6d64d3906eaf 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -642,7 +642,7 @@ &lsio_gpio5 {
 	status = "okay";
 };
 
-&pcieb {
+&pcie0 {
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
@@ -652,6 +652,16 @@ &pcieb {
 	status = "okay";
 };
 
+&pcie0_ep{
+	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
+	phy-names = "pcie-phy";
+	pinctrl-0 = <&pinctrl_pcieb>;
+	pinctrl-names = "default";
+	reset-gpio = <&lsio_gpio4 0 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcieb>;
+	status = "disabled";
+};
+
 &sai0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai0>;

-- 
2.34.1