[PATCH] ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4

[Andreas Kemnade]

The late init call just writes to omap4 registers as soon as
CONFIG_MFD_CPCAP is enabled without checking whether the
cpcap driver is actually there or the SoC is indeed an
OMAP4.
Rather do these things only with the right device combination.

Fixes booting the BT200 with said configuration enabled and non-factory
X-Loader and probably also some surprising behavior on other devices.

Fixes: c145649bf262 ("ARM: OMAP2+: Configure voltage controller for cpcap to low-speed")
CC: <stable at vger.kernel.org>
Signed-off-by: Andreas Kemnade <andreas at kemnade.info>
---
 arch/arm/mach-omap2/pmic-cpcap.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/pmic-cpcap.c b/arch/arm/mach-omap2/pmic-cpcap.c
index 4f31e61c0c90..9f9a20274db8 100644
--- a/arch/arm/mach-omap2/pmic-cpcap.c
+++ b/arch/arm/mach-omap2/pmic-cpcap.c
@@ -264,7 +264,11 @@ int __init omap4_cpcap_init(void)
 
 static int __init cpcap_late_init(void)
 {
-	omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
+	if (!of_find_compatible_node(NULL, NULL, "motorola,cpcap"))
+		return 0;
+
+	if (soc_is_omap443x() || soc_is_omap446x() || soc_is_omap447x())
+		omap4_vc_set_pmic_signaling(PWRDM_POWER_RET);
 
 	return 0;
 }
-- 
2.39.5